AIM DIY: Marble Paper with Oil Paints

marbledpaper_IMG_0800
From 2014-2016 I chronicled my crafty endeavors on the site Adventures-in-Making. I’ve selected a few of those DIY’s, Recipes, and other posts to share on the site.

Whenever Rachel and I get together there is always a lot of making. We hang out, paint, draw, and then we party (ie: DIY TIMES). In anticipation for this visit, we made lists of possible crafts, and “Paper Marbling” appeared on both lists. Done!

We’d seen several methods, but we had almost all the supplies to marble with oil paints so we decided to try that out first. Having the best oil paints can make creating these easier. But it was a long, fun day; full of “oooooh” and “aaaaahhh,” sunshine, and turpentine fumes. We wanted to share our method and tips with you, so that you can make your own marble marvel.

marbledpaper_IMG_0712

Basic Supplies

  • Oil Paint Colors – cheap oil paints should work just fine, we used the M. Graham paints we had on hand.
  • Turpentine – Easily found at a hardware store.
  • Big plastic bin to float the paint in
  • Small containers to mix paint colors and turpentine
  • Cardstock (We loved the colored card stock best!)
  • Disposable bamboo skewers or spoons for stirring
  • Nitrile Gloves

marbledpaper_IMG_0692

Step 1: Prep

Before we got started we made a comb by taping toothpicks into a small strip of card stock. The comb was handy for pulling through the colors, and encouraging more “swirly bits.”

We set up our marbling table outside, which I recommend highly. You want to use a table or cover that it’s okay to get paint on. This is a messy craft, to be sure. We set out a tarp for drying our finished papers, put on our gloves and starting mixing things up.

We filled two plastic bins with about an inch or water and set them aside. Then we put out several colors of oil paints in our mixing containers.

marbledpaper_IMG_0737
It was a little trick to get the right mix of turpentine and paint, initially. We discovered that the ideal texture was somewhere around the thickness of whole milk.

marbledpaper_IMG_0740We added turpentine to the paint containers in small pours, and mixed it thoroughly with a bamboo skewer. If we needed to add more turpentine we did it as soon as we had the paint mixed to a consistent texture.

marbledpaper_IMG_0785

Step 2: Pouring the Paint

Then we just poured the paints on top of the water! Simple. Sometimes we did little drops, sometimes we just chunked it all in.

marbledpaper_IMG_0786
Our first batch of color was always full of the same color family, so that as the colors mixed in the water we didn’t end up with a bunch of brown paper. (Towards the end we got a little more daring, and had great results adding in complementary colors to the batches.)

marbledpaper_IMG_0788

marbledpaper_IMG_0789
We got a lot of mileage out of our toothpick combs, pulling them through the paint to swirl the colors together.

marbledpaper_IMG_0793

Step 3: Dipping the Papers

Once we were happy with a design, we laid the card stock quickly on top of the swirled colors, and removed it as delicately as we could. (Rachel had a great dunking method that involved bending the card stock down the middle– hamburger style– then rolling down from the middle to the outside edges before lifting from the water.)

marbledpaper_IMG_0794
Tada! It was amazing how unpredictable the results were. What you saw on the water might not be at all what showed up on the paper. We loved the look we got towards the end, when there was less paint and it all seemed to be thinner.

marbledpaper_IMG_0799
We did two different color stories, one was reds and golds and one was blues and greens. The reds tended to get a little “gory” at times, but looked beautiful on colored papers.

marbledpaper_IMG_0816

Step 4: Drying and Future Projects with Marbly Goodness

We laid the paged out for a few hours, while we cleaned all the paint up. When we were ready to go inside we stacked the sheets and set them aside to dry. It took a good 5 days for the oil to be dry to the touch, but now they are, and I have all kinds of ideas about what to do with my collection.

Maybe I’ll revisit an old DIY, what do you think?

The possibilities are endless. I’m okay with that.

marbledpaper_IMG_0825

Things We Learned

  • Working outside is key. The Turpentine is kinda smelly, and even with a light breeze we felt like we were standing in the fumes. Working outside also made cleanup a lot easier, with a big trash can and a hose available. Make sure to dispose of turpentine properly!
  • Initially we tried thinning the oil paint with walnut oil, but it did not allow the paint to spread out across the water. We had to drop everything and head to the store for turpentine to make the project come together. I have seen a couple of recommendations online for turpentine alternatives, but we didn’t try any (after the oil fiasco.)
  • If your paint drops to the bottom instead of floating, add a little more turpentine.
  • Sometimes less paint is better. I loved the last sheets we printed from each batch.
  • Opaque paint on black paper is tres cool.
  • Each sheet is cooler than the last, which means you won’t ever want to stop. Ever.

3 thoughts on “AIM DIY: Marble Paper with Oil Paints

  1. There is recipes out there that do Marbling with Borax have you heard of that ? But this has given me an answer to deal with the oil paints that i have, So Thankyou so very much . Regards……………… Pauline

  2. I have been on a book binding course for just over two years and we discuss marbling. While on the computer this afternoon, I found your excellent description, thank you for giving me ideas! ;o) all the very best to you and you future projects Martin Dawson

Comments are closed.