AIM TOOLBOX: Fiskars Titanium Rotary Cutter Review

IMG_1530_rotarycutter
From 2014-2016 I chronicled my crafty endeavors on the site Adventures-in-Making. I’ve selected a few of those DIY’s, Recipes, and other posts to share on the site.

I recently decided to treat myself (and my t-shirt rug project) to a 45mm cutter. For the past several years I have tried to make do with an 18mm cutter, but I was a fool. (All those days re-cutting fabric that the dinky little blade didn’t cut through…)

Even though our local craft store carries a limited supply of anything related to sewing, they had a wide selection of hand-held rotary cutters. I could choose between Fiskars and Olfa, and have my pick of safety features, shapes, colors, weights– too many options, really.

IMG_1604_rotarycutter
I picked the simplest looking one- the Fiskars 45 Millimeter Titanium Rotary Cutter took it home, and started cutting.

IMG_1592_rotarycutter
45mm paper cutting blades fit in the handheld cutter. The possibilities!

Things To Love

  • Since it is a simple, symmetrical design it works in my left or right hand, which is important.
  • I have an old rotary paper cutter from Fiskars, and an assortment of awesome 45mm paper blades which all work in this hand-held cutter. I’m excited to try out some of the decorative blades in a more freeform way. (Watch me scallop everything like I round corners.)
  • Cuts through fabric (even multiple layers of knits) like butter. When I put in the paper blades, they cut through paper just as easily. I attribute this amazingness to the blade itself.

IMG_1578_rotarycutter

Things to Hate

  • The blade is quite far from the plastic guide of the holder. It means there’s a bit of excess “wobble” if you tilt your hand. It also leaves the blade even more exposed when open, threatening to cut you or to break.
  • The whole thing feels so light weight and hollow that you have to apply a lot of downward pressure to to cut through a thicker fabric.
  • To replace the blade you remove a basic screw from a plastic nut, but then a tiny washer pops out at you. I’m betting it will work just fine when that little washer escapes for good.
  • The safety mechanism has a child-safe button that you have to push down with your fingertip while sliding the lever. That’s well and good, but the problem is you have to push that same tiny little button to close the guard back up. I have learned the hard way that it should be dead simple to close/cover/or otherwise protect yourself from sharp objects. Bleeding on a project seldom makes it better.
Does this seem like an overly complicated safety feature?
Does this seem like an overly complicated safety feature?

IMG_1571_rotarycutter

Things to Be Confused By

  • The screw that keeps the blade in the casing has markings for “light” and “heavy” with helpful directional arrows. But, what does it mean? Light? Heavy? Is there something I’m missing? Heavy fabric? A heavy hand? A setting for those special days when it feels like the weight of the world is upon you?  The heavy setting tightens up the screw, making the blade roll more slowly/difficultly. The light setting lets the blade roll with less resistance, but there is even more play in the blade. I haven’t found reference to this setting on the packaging or online. Anybody know the thought behind it?

To Summarize

Fiskars 45mm Rotary Cutter Blades= great!
This particular blade holder= meh. Functional but meh.

Have you worked with one you like? Or is this just another case of “settle for what you’ve got”?

AIM DIY: Paper Spiderwebs to Decorate Everything

From 2014-2016 I chronicled my crafty endeavors on the site Adventures-in-Making. I’ve selected a few of those DIY’s, Recipes, and other posts to share on the site.

Step by step this house is getting properly October spooky. I’m a big fan of decorating with the things I have around, and this collection of tarnished silver and moody ornaments needed one little touch, so I decided to make a spiderweb table runner out of scrap paper and a piece of ribbon.

IMG_1673_paperspiderwebs

SUPPLIES

  • A few sheets of paper, any color you fancy. I used card stock, which was a bit trickier to cut but more durable in the long run.
  • Small clips or tape
  • Your favorite craft knife
  • A hole punch
  • Ribbon
  • The spiderweb templateaim_paperspiderweb

IMG_1682_paperspiderwebs
Once you have printed the spiderweb template, use tape or the clips to secure it to a sheet or two of paper, and cut the spiderweb shape out with a craft knife. You will also punch holes where each X is.

IMG_1693_paperspiderwebs

Cutting Tips

Start trimming the small center pieces out first and move to the large pieces. I actually cut all the inner pieces, then moved on the the next sheet of paper until I have enough pieces. Then I cut the outer shape out of several pieces at once using scissors.

IMG_1701_paperspiderwebs
When you’ve cut out and punched all your pieces, weave a piece of ribbon in and out of the holes to connect several spiderwebs.

IMG_1791_paperspiderwebs
I overlapped the corners of each spiderweb piece to make my table runner…

IMG_1716_paperspiderwebs
and hung them all on one ribbon for a creepy spiderweb banner.

IMG_1735_paperspiderwebs
The possibilities are, as they say, endless! I’m even thinking of creepy spiders to add to them.

The motionless, paper kind.

What’re you decorating with?

AIM DIY: Spookily Free and Easy Ghosts

IMG_1479_spookyghosts
From 2014-2016 I chronicled my crafty endeavors on the site Adventures-in-Making. I’ve selected a few of those DIY’s, Recipes, and other posts to share on the site.

When I was a kid my mom came up with all sorts of awesome crafts for us to do, and being a typical goth-in-the-making I loved the halloween crafts most of all. One year we made cheesecloth ghosts with balloons and glue and it’s a project that has haunted me to this day.

I decided that I really wanted some ghost friends, but lacking balloons and cheesecloth I decided to make some up, Alison style. (IE: Free, Quick, and Fun.)

IMG_1396_spookyghosts

SUPPLIES

  • At least a couple of feet of sheer or thin fabric – old sheets or window sheers work great!
  • All-purpose flour
  • Bottles: Soda, water, or wine. Glass or plastic.
  • Wire or wire coat hangers
  • Plastic bags
  • Rubber bands
  • Scissors
  • A bucket or bin to mix your flour paste in

Step 1: The Form

IMG_1417_spookyghosts
To begin will make a simple armature out of wire (or out of a wire hanger). Cut a piece about 24″ long, and twist it together to form one big loop.

IMG_1426_spookyghosts
Slip the loop over the neck of your bottle, and twist the arms slightly so that they sit securely on the bottle and point slightly upwards. Using a scrap piece of fabric or paper, form a ball shaped head over the neck of the bottle and secure it with a rubber band.

IMG_1440_spookyghosts
To make the armature (form of the ghost) easier to remove, cover it with a plastic grocery bag, and secure it with a rubber band.

Measure the height of your ghost form from the base, across the head, and to the base on the back side. Cut a square of fabric this size to cover your form. (This is a great time to tear your fabric instead of cutting, if you want. Frayed edges are a bonus!)

Step 2: Stiffening and Forming the Fabric

IMG_1447_spookyghosts
Although flour may not last forever when used as a paste, it works perfectly for a ghost that will only haunt your house for a year or two. Combine 4 parts water with 1 part all-purpose flour in a large container and mix well with your fingers. Soak your ghost fabric, and wring it gently.

IMG_1448_spookyghosts
Spread the fabric over the ghost form, with a corner of the fabric pointing forwards.

IMG_1450_spookyghosts
Using your creativity (and maybe a clip or two) shape the cloth as creepily as you want! (I loved adding a fold along the “hair line” so that it looked like my ghost was in a cloak.)

IMG_1456_spookyghosts
If you’d like, remove some of the excess fabric from the “arms” of your ghost. (Make sure to leave fabric puddled at the front and back; this will ensure that your ghost will sit up when it’s all dry.)

Leave your new little friend to dry overnight, with a fan blowing if you can. When it’s completely dry, gently pull the bottle form out of the stiff fabric. (If it’s not firm enough to stand, you can mix up some more of the flour and water and paint it onto your fabric while it’s still on the form. You may want to use a higher ratio of flour to water.)

IMG_1477_spookyghosts
Boo!

IMG_1485_spookyghosts

IMG_1505_spookyghosts
If you’re feeling extra crafty, you can paint right on your ghosts with watercolor or acrylic paints. I have some scary plans for one of mine.

IMG_1482_spookyghosts

Use What You’ve Got!

If you don’t have scraps of fabric lying around, this project is also fun with thin paper, tissue paper, or even paper towels. Just make one adjustment: instead of soaking the paper in your paste, lay the paper across your form and paint the paste on with your fingers or a craft paint brush. Saturate the paper slowly and let it fall again the form. You can add multiple layers of paper for more texture (like the tissue paper ghost above) and even cut out a mouth and eyes!

Stick an LED “candle” in it, and things get even creepier!

IMG_1626_spookyghosts
Scary Ghost Sound!

What’s frightening you this season?

AIM DIY: No Sew Woven T-Shirt Rag Rug

IMG_1337_tshirtrug
From 2014-2016 I chronicled my crafty endeavors on the site Adventures-in-Making. I’ve selected a few of those DIY’s, Recipes, and other posts to share on the site.

A couple of months ago I tore up the carpet in my office and replaced it with a wood-ish surface. It’s been great through these warm months, but I want something to stand on when the cold sneaks in. Couple that need with a stack of t-shirts left over from the quilt project, and you have my newest best friend, the t-shirt rag rug.

IMG_1019_tshirtrug
I built a 30″x30″ make-shift loom out of a piece of plywood and scrap wood, but if you search online you can find frames built from pretty much anything. (A Beautiful Mess used cotton scraps and a big piece of cardboard. Also, Pinterest)

IMG_1016_tshirtrug
I put nails along each end, 1 inch apart. Good hammer practice for a hammer novice.

IMG_1063_tshirtrug
With the loom assembled, I moved to materials.

SUPPLIES

Stripping

The rug was built with 1.5″ loops for the warp (base strips) of my rug, and 1.75″ strips woven through.

IMG_1044_tshirtrug
I used a large straight rotary blade and a metal ruler to cut three navy shirts into the 1.5″ loops, then cut the rest of the shirts into 1.75″ strips. (This is a very forgiving fabric, so estimation is ok!)

IMG_1072_tshirtrug
I hooked the navy warp pieces on each side of the loom using the natural loop and stretch of the t-shirt.

IMG_1086_tshirtrug
I prepared to weave by attaching the first strip to the first warp loop. I cut a slit in one end of the strip, fed the other end around the first warp piece and back through the slit. Then I pulled it tightly and began to weave.

Not a normal knot.

I connected a lot of strips to finish this rug using the method shown below. It’s quick and tidy, and ensured you don’t have a lot of extra bulk at your connection points.

IMG_1222_tshirtrug

  1. Cut a small slit in the ends of each strip.
  2. Feed the new strip into the hole at the end of the other.
  3. Take the other end of the new strip and feed it through the slit on the same strip.
  4. Pull on the new end to tighten the knot. Smooth or trim extra material if needed.

(The video below shows how I knotted at the end of a strip.)

Now Weave!

IMG_1112_tshirtrug
Starting at that first warp piece, I wove in and out of each loop to the end of the loom. At the end I wrapped either over or under the last piece to start back down the loom. The second strand went over the strands that the first went under, and vice versa.

IMG_1122_tshirtrug
From there it was basically rinse and repeat. I wove back and forth, connecting strips and changing colors.

IMG_1139_tshirtrug
When possible I fed the strip through the warp flat, then pulled it down with my fingers to bunch it up.

IMG_1223_tshirtrug
The pattern and color combination were very important to me, and I got more and more excited as I worked on it. When I put the final strip in, I tied it off using a normal knot on the last piece of navy.

Finishing it off

Here’s where I admit this rug is really just a gigantic pot holder, and I finished it off the same way. I pulled the first warp loop free and fed the second through it, then fed the third through that one, and so on down the line. (Video Below)

IMG_1330_tshirtrug
Once I was down to the last two loops, I changed tactics. I cut the loop of the last piece, fed one strip through the second to last loop and tied it off.

IMG_1334_tshirtrug
I did the same thing on the other end and suddenly had a rug in front of me.

IMG_1350_tshirtrug

IMG_1344_tshirtrug
After basking in the last moments of sunshine, I rolled up the rug and brought it inside.

IMG_1360_tshirtrug
Where it was immediately claimed by another friend…

IMG_1368_tshirtrug
Cooper.

IMG_1380_tshirtrug
Looks like I’ll have to weave another rug for myself.

Next Time

  • The next rug will be bigger. Once I took this one off the loom it shrunk down a bit, and I love it too much for it to be small.
  • I won’t pull the woven strands as tightly, which will hopefully help with the shrinking.
  • Maybe I’ll try non-stretch cotton scraps?
  • I will plan to move the loom frame around a lot, and possibly rig up some way of leaning it upright while I’m weaving. Working flat gave me a back-ache.
  • I will take it in little batches, weaving in front of the tv or in public. If I weave in public I will look very serious about turning scraps into a comfy rug.

A sign of a successful project is the ability to look forward to the next one.

UPDATE: I enjoyed this project so much that I decided to remake this rug- BIGGER! I built a much larger loom using scrap wood and screws, then followed the same process to build this monstrosity. It sits cozily by my work table now, warms my feet, and makes me happy.

IMG_2188_roundtshirtrug

AIM DIY: Build a Box and Lid

IMG_1006_buildaboxFrom 2014-2016 I chronicled my crafty endeavors on the site Adventures-in-Making. I’ve selected a few of those DIY’s, Recipes, and other posts to share on the site.

I love putting my creative instincts to good use in a 3d world, and that means I get a kick out of building boxes. There’s something magical about turning a little chipboard or cardboard and a little tape into a functional container, and it seems like I have plenty of opportunities to do just that.

The basics of building a box with a lid (which I call a hatbox) are very basic indeed. I drew up a little sample sheet with the very simplest version. Use cardboard or chipboard, scissors or a craft knife, and your favorite tape.


My challenge today was building a gift box for a set of wine glasses. (Recognize the etching process?)

IMG_0849_buildabox
I measured the length, depth, and height of the set, and got my favorite materials out.IMG_0916_buildabox

SUPPLIES

  • Chipboard Pieces
  • Gummed Paper Tape – I like working with this kind of tape when I’m using chipboard or cardboard. It starts out un-tacky, and when you wet it with a sponge it is like you poured a whole bunch of glue on it. It can be kind of messy, but you can shift it around until it dries, making it very forgiving.
  • Craft Knife
  • Scissors
  • Ruler

IMG_0949_buildabox
First I cut the 5 pieces for the bottom of the box, and pieces of tape for each seam.

IMG_0955_buildabox
Since I knew some of the tape would show on the final box, I made sure to cut an angle on any piece of tape that overlapped another piece- especially on corners.

IMG_0970_buildabox
To place the tape correctly on the board, I first laid the board out perfectly on my mat. I left a board’s width between each piece to allow for them to fold.

IMG_0975_buildabox
I used a wet rag moisten each piece where I needed it, then attached the tape pieces to my boards.

IMG_0979_buildabox
I’ve outlined my tape pieces here. The first pieces I placed were the a’s, then I moved on to b, then c.

IMG_0981_buildabox
I flipped the whole thing over, and started folding up and taping the sides (applying more water to keep the tape sticky and smoothing out any bubbles.)

IMG_0982_buildabox

IMG_0945_buildabox
With the bottom portion of the box completed, I measured the outside of the completed box and added about 1/8 of an inch to allow the lid to close easily. I chose 5″ at the height of the lid, and built another box like the first, using those dimensions.

IMG_0986_buildabox
I’m a big fan of a simple kraft colored box, but since this was a gift, I wanted to add a little pizazz. I printed a design on card stock, and cut it down to fit each side of the box lid. I used spray mount to adhere it to the box.

IMG_0992_buildabox
Then added a little ribbon, a card…
< a href=”https://andsothere.com/wp-content/uploads/2020/10/IMG_0993_buildabox.jpg”>IMG_0993_buildabox
and a divider inside to kept the glasses from clanking.

IMG_1006_buildabox
I’m super happy with the way this box turned out– a perfect fit for gifting and storing the glasses.

IMG_1011_buildabox
I hope you can build off the simple instruction sheet to create the perfect home for your treasures, and of course some treasures for your home.

AIM DIY: Marble Paper with Oil Paints

marbledpaper_IMG_0800
From 2014-2016 I chronicled my crafty endeavors on the site Adventures-in-Making. I’ve selected a few of those DIY’s, Recipes, and other posts to share on the site.

Whenever Rachel and I get together there is always a lot of making. We hang out, paint, draw, and then we party (ie: DIY TIMES). In anticipation for this visit, we made lists of possible crafts, and “Paper Marbling” appeared on both lists. Done!

We’d seen several methods, but we had almost all the supplies to marble with oil paints so we decided to try that out first. Having the best oil paints can make creating these easier. But it was a long, fun day; full of “oooooh” and “aaaaahhh,” sunshine, and turpentine fumes. We wanted to share our method and tips with you, so that you can make your own marble marvel.

marbledpaper_IMG_0712

Basic Supplies

  • Oil Paint Colors – cheap oil paints should work just fine, we used the M. Graham paints we had on hand.
  • Turpentine – Easily found at a hardware store.
  • Big plastic bin to float the paint in
  • Small containers to mix paint colors and turpentine
  • Cardstock (We loved the colored card stock best!)
  • Disposable bamboo skewers or spoons for stirring
  • Nitrile Gloves

marbledpaper_IMG_0692

Step 1: Prep

Before we got started we made a comb by taping toothpicks into a small strip of card stock. The comb was handy for pulling through the colors, and encouraging more “swirly bits.”

We set up our marbling table outside, which I recommend highly. You want to use a table or cover that it’s okay to get paint on. This is a messy craft, to be sure. We set out a tarp for drying our finished papers, put on our gloves and starting mixing things up.

We filled two plastic bins with about an inch or water and set them aside. Then we put out several colors of oil paints in our mixing containers.

marbledpaper_IMG_0737
It was a little trick to get the right mix of turpentine and paint, initially. We discovered that the ideal texture was somewhere around the thickness of whole milk.

marbledpaper_IMG_0740We added turpentine to the paint containers in small pours, and mixed it thoroughly with a bamboo skewer. If we needed to add more turpentine we did it as soon as we had the paint mixed to a consistent texture.

marbledpaper_IMG_0785

Step 2: Pouring the Paint

Then we just poured the paints on top of the water! Simple. Sometimes we did little drops, sometimes we just chunked it all in.

marbledpaper_IMG_0786
Our first batch of color was always full of the same color family, so that as the colors mixed in the water we didn’t end up with a bunch of brown paper. (Towards the end we got a little more daring, and had great results adding in complementary colors to the batches.)

marbledpaper_IMG_0788

marbledpaper_IMG_0789
We got a lot of mileage out of our toothpick combs, pulling them through the paint to swirl the colors together.

marbledpaper_IMG_0793

Step 3: Dipping the Papers

Once we were happy with a design, we laid the card stock quickly on top of the swirled colors, and removed it as delicately as we could. (Rachel had a great dunking method that involved bending the card stock down the middle– hamburger style– then rolling down from the middle to the outside edges before lifting from the water.)

marbledpaper_IMG_0794
Tada! It was amazing how unpredictable the results were. What you saw on the water might not be at all what showed up on the paper. We loved the look we got towards the end, when there was less paint and it all seemed to be thinner.

marbledpaper_IMG_0799
We did two different color stories, one was reds and golds and one was blues and greens. The reds tended to get a little “gory” at times, but looked beautiful on colored papers.

marbledpaper_IMG_0816

Step 4: Drying and Future Projects with Marbly Goodness

We laid the paged out for a few hours, while we cleaned all the paint up. When we were ready to go inside we stacked the sheets and set them aside to dry. It took a good 5 days for the oil to be dry to the touch, but now they are, and I have all kinds of ideas about what to do with my collection.

Maybe I’ll revisit an old DIY, what do you think?

The possibilities are endless. I’m okay with that.

marbledpaper_IMG_0825

Things We Learned

  • Working outside is key. The Turpentine is kinda smelly, and even with a light breeze we felt like we were standing in the fumes. Working outside also made cleanup a lot easier, with a big trash can and a hose available. Make sure to dispose of turpentine properly!
  • Initially we tried thinning the oil paint with walnut oil, but it did not allow the paint to spread out across the water. We had to drop everything and head to the store for turpentine to make the project come together. I have seen a couple of recommendations online for turpentine alternatives, but we didn’t try any (after the oil fiasco.)
  • If your paint drops to the bottom instead of floating, add a little more turpentine.
  • Sometimes less paint is better. I loved the last sheets we printed from each batch.
  • Opaque paint on black paper is tres cool.
  • Each sheet is cooler than the last, which means you won’t ever want to stop. Ever.

AIM RECIPE: Scrap Veggie Broth to Perfect Any Recipe


From 2014-2016 I chronicled my crafty endeavors on the site Adventures-in-Making. I’ve selected a few of those DIY’s, Recipes, and other posts to share on the site.

Maybe everyone knows to make their own veggie broth. I didn’t until a couple of years ago when I had a pile of veggie scraps and an aha moment. After a couple of quick searches, I decided to toss everything in the slow cooker and see what happened.

AMAZING happened. I ended up with a complex  unique broth that I was eager to cook with.

Since then I’ve saved almost all my veggie and fruit scraps in a bag in the freezer, and when it gets full it gets turned into what I lovingly call “trash soup”.

IMG_0557_veggiebroth

RECIPE: Scrap Veggie Broth in a slowcooker
Author: Alison (Adventures-in-Making)
Cook time:
Total time:
This simple veggie broth will use up all your fruit and vegetable scraps, and make your next meal that much better.
Ingredients
  • 1 Tsp. Salt (to Taste)
  • A Variety of Raw Vegetable Scraps*
  • You can use skins, scraps, and leftover: Zucchini, Greens, Spinach, Okra, Apples, Tomatoes, Asparagus, Artichoke, Peas, Green Beans, Onions, Cabbage, Broccoli, Leeks, Garlic, Peppers, Carrot, Mushroom Stems, Herbs…. almost anything.
Instructions
  1. *Make sure to only use ingredients that you COULD eat fresh. Nothing dirty, slimy, moldy, etc. A little soft is fine. The key to the best broth is variety. Try not to use too much of anything with a strong flavor- but remember that this is a low pressure process. If it doesn’t turn out, no big deal!
  2. Put all your scraps in a slow cooker and cover with water.
  3. Sprinkle salt over the mixture and mix it slightly with a spoon.
  4. Put crock pot on “low” and leave overnight– 10-20 hours– checking occasionally for taste and to stir gently.
  5. Ladle broth over a strainer to separate out vegetable scraps and broth.
  6. OPTIONAL: Simmer the broth on Med/High to condense the soup for freezing. Allow to cool completely before placing in a container or ziplock bag, and freeze until you’re ready. (Make sure to label your container with tasting notes and a date.)
IMG_0576_veggiebroth
For my broth today, I had a wide variety of veggies. From highest to lowest volume I used: zucchini, brussel sprout greens, tomatoes, onion, okra, mushroom stems, lemon rind, apple, bell pepper, and basil stems.

Make sure your scraps are clean and in relatively small pieces, then dump them into a medium crock pot,

IMG_0586_veggiebroth
and cover them with water.

IMG_0589_veggiebroth
Add about a teaspoon of salt (to taste) to the water.

Cover the crock pot, set it on “low” and let it do its thing through the evening and overnight. (It’s good to taste the broth, and stir occasionally to make sure everything is going well. If it starts to get bitter you can either stop the process, or give it some more time to possible cook itself out.)

After about 10-20 hours your concoction will look more like this:

IMG_0608_veggiebroth
and will smell up your whole home in a delicious way. Use a ladle to spoon out the broth over a strainer…

IMG_0628_veggiebroth
to separate out the broth and veggie chunks. Throw those depleted veggie scraps in the compost and look at what you’ve made!

IMG_0640_veggiebroth
Beautiful, complex, broth– a perfect way to start almost any recipe.

Optional: If you want to save the broth for another day, you might find it useful to condense and freeze it. To do this, put your broth in a small pot and simmer on medium-high under a fan.

IMG_0658_veggiebroth
Excess water will be released as steam, and after a while you’ll have a thicker, darker condensed broth. (This process can take some time, so I usually plan to do dishes, cleaning, or other kitchen activities while I wait.) Take the pan off the heat.  As your broth is cooling, do a final tasting and label your container (or ziplock bag) with tasting notes and a date.

IMG_0659_veggiebroth
Then simply pour the cool broth into your container and freeze it for the perfect recipe. The more broths you make, the more you’ll notice differences in their flavor- making store bought broth seem ludicrous!

IMG_0674_veggiebroth
We love adding the broths to everything we cook. It will kick up anything from soup, to sauces, to quinoa, and make you smile. (Promise.)

What I’ve Learned

•I’ve said it before, but variety is really key here. I usually leave a small collection of scraps in my freezer bag for the next broth, rather than using too much of one flavor.
•You may be an onion and garlic maniac, but don’t make a broth out of just those. Other veggies are necessary to cut the bitterness of over-extracted onions. Trust me.
•Good advice from a friend- “If the broth doesn’t taste good, throw it away. Don’t let it ruin a meal.” If your broth turns out weird or bitter, it’s not the end of the world. Try again next time!
•Try out a parmesan rind sometime, but otherwise avoid oils.
•Mellow fruits (like apples) make for a carmelly broth that would be lovely in a lot of dishes. Bolder fruits (cherries, berries, citrus) are best used in very small quantities.
•Some vegetables are stronger than others- broccoli, brussel sprouts, and cabbage can take over a broth completely. I don’t mind, but maybe you do?
•Yum.

AIM SHOW+TELL: Turning an Old Sweatshirt into an iPad Sleeve

ipadcoverimg_0396
This is another typical Alison project; one part problem (needed an iPad Sleeve), one part recycling (awesome old hoodie sweatshirt.) I’ve been donating and repurposing things left and right lately, and this old hoodie was no different. It was made for me by a college classmate, and I’m not sure the last time I even put it on

ipadcoverimg_0327
I decided to embrace the ragged look, since the pattern was already worn and “vintage” and I knew it would be tricky to work with multiple layers of sweatshirt and zippers. (Also, I am NOT a tidy tailor. I’m just going to accept that about myself.)

ipadcoverimg_0320
To get the size right, I traced the iPad on a scrap piece of card stock to make a template.

ipadcoverimg_0333
I cut the tablet shape out of the card stock, used it to “frame” the part of the design I wanted to feature, and traced it with chalk.

ipadcoverimg_0337
I left an allowance of about half an inch on all sides, folded the sweatshirt there, and cut the a rectangle out of the folded sweatshirt.

ipadcoverimg_0339
I decided to line the pouch with another layer of sweatshirt, and used this as an opportunity to include the zipper that was already stitched on. I cut two more of my template pieces from either side of the zipper…
ipadcoverimg_0340
then stitched them together at the bottom. I refed the zipper pull into the zipper pieces– backwards because the raw edge of the zipper would face out when the pouch was finished.

ipadcoverimg_0345
I then stitched my original pattern pieces across the zipper on either side, leaving me with an almost-pouch with open sides. At the last minute I decided to slip a piece of chipboard through the side to reinforce the front of the pouch (and hopefully save the tablet from rogue poking accidents). After sewing up the open sides (pinked edges out) and reinforcing the ends of the zippers with a few hand-stitches, I was done.

ipadcoverimg_0354
I’m really glad I went with a rough-and-tumble look, because it hides a few of the difficulties I had with pre-worn stretchy material.

ipadcoverimg_0367

ipadcoverimg_0390

ipadcoverimg_0424

http://adventures-in-making.com/wp-admin/post.php?post=4978&action=edit#

Now I don’t have to worry as much about carrying my iPad around with me, and I have one less piece of wearable nostalgia to hoard. Now to move on to the next pile….

AIM RECIPE: Homebrew Simple & Delicious Hard Cider

appleciderimg_9240From 2014-2016 I chronicled my crafty endeavors on the site Adventures-in-Making. I’ve selected a few of those DIY’s, Recipes, and other posts to share on the site.

***

Safety Husband has been making hard apple cider for me for a couple of years now. He’s super crafty in his own way, and loves to dissect projects down to their base elements, starting with the most basic method and backtracking till he has done every step he can. He put together a very simple recipe for making your own apple cider out of non-preservative apple juice, similar to his first foray into the sweet sparkling beverage. 

appleciderimg_0290

Important Points

Hard Apple Cider is Alcoholic

In most places it’s legal for an adult (21+) to brew their own beer and cider, but make sure to check with your state/county/hoa laws before you get started, and before you try to take your homebrew from your home. Drink Responsibly, and all that other wisdom.*

Brew Times and Temperatures Will Vary

Depending on how everything comes together for you, and what season it is when you’re fermenting, it may take a little longer to go from apple juice to cider. Make sure to keep your bottles in a place that you will check on a regular basis to makes sure everything is still looking right. (More on that below.)

Sanitize Everything

Make sure to keep a rag and bucket of sanitizer around during all the steps. You will wipe down and/or soak every piece of equipment and packaging that touches your ingredients. Your goal is to give the yeast a clean house to go nuts in, they don’t need any dirty roommates (bacteria, etc.)

Overflows and Busted Bottles Happen (from time to time)

Since fermentation creates pressure and lots of action, there can be the occasional accident that ends in a spill. Safety Husband recommends placing your bottles of brew (both during fermentation and after bottling) in a waterproof bin that can catch any run-off or popped bottles. If you want added protection, put a cover loosely over the top of the bin, or hang a curtain across it. (Make sure that you’re still allowing air to escape from your bottles during fermentation, though.)

appleciderimg_9158

Basic Supplies

If you are able to find a local homebrew shop, I highly recommend trying them first for ingredients and supplies. Good homebrew shops (like my local favorite Mt Si Homebrew Supply) always stock the freshest ingredients and provide helpful advice. The Homebrewers Association keeps a list of shops sorted by country and state/province. It’s a great place to find the names of local shops. One caveat – you may need to search for the shop on a search engine or Facebook to find their full info and website.
AHA – Find a Homebrew Supply Shop

Ingredients

  • Apple Juice – any pasteurized juice will work. Be sure that it does not contain sulfites or sorbates, because these will prevent fermentation. Ascorbic acid (sometimes listed as vitamin c) is the only common preservative that will not hurt yeast.
  • Yeast – any yeast intended for wine, cider, or beer will ferment apple juice into hard cider. Different yeasts will bring out slightly different flavors, so don’t be afraid to experiment. Red Star Cotes des Blancs is a great one to try first because it has a good flavor, is easy to find, and cheap. Dry yeasts are easier to ship and can be stored longer.

Supplies

  • Star San – Use this to sanitize everything that will be in the cider, or could touch it. Soap and detergents just remove dirt. You need to sanitize equipment immediately before using it to ensure that extra bacteria, mold, or wild yeast won’t be there to foul up your brew. Follow the directions on the bottle to mix it on brew day. The concentrate could burn you, so follow the directions closely. Once mixed properly, its too weak to hurt your skin and the residue is completely safe. You can keep the same batch in a bucket for a few weeks and use it again later as long as it is not cloudy. If its cloudy, mix a new batch. Star San gets rid of disagreeable bacteria in a minute. It doesn’t need to be rinsed off, and will not leave any flavors in your cider. If your hands are in it enough, it may dry them out a bit but otherwise it won’t hurt you.
  • Drilled stopper – You need a stopper to fit the top of your bottle so that nothing can get in while the cider is fermenting. It needs to have a hole in it so that CO2 may escape. This small universal stopper fits many 1/2 and 1 gallon apple juice bottles.
  • Airlock – As yeast ferment sugars, they release CO2. The cider will have a constant stream of tiny CO2 bubbles that need to escape. An airlock allows that pressure to release without allowing nasty bacteria, fruitflies, pet hair, or ordinary dust into your cider. The 3 Piece Plastic Airlocks are the easiest to use and clean.
  • Bottles – One the cider is done fermenting, you need clean bottles to carbonate and store it in. They need to be able to handle pressure during carbonation, so make sure they’re designed for carbonated beverages. We used glass flip-top bottles; just be sure they’re rated for high pressure. Some people have had luck reusing clean plastic soda bottles, and many people reuse and cap glass beer bottles. Make sure whatever bottle you choose is rated for the pressure of carbonation. Anything else (like a glass beer growler) will explode.

appleciderimg_9173

Brew Day

Step 1: Clean and Sanitize

Before you do anything else, sanitize all of your tools. Put your rags, scissors, stopper, airlock, and even the yeast packet into the sanitizer for at least 1 minute. You can leave it soaking until you’re ready to use it.

appleciderimg_9175
You also want to wipe down the top of your juice bottles (and any other possibly contaminated surfaces) with a sanitizer saturated dishcloth.

appleciderimg_9188

Step 2: Mixing

You will be fermenting in the bottles that your juice came in. During the fermentation process there will be a lot of action in your cider, so the first step in brewing is to pour a little off the top of the jug to leave an inch or two of space. Some yeasts, especially beer yeasts may also accumulate on the top, which is normal. (This is called krausen.)

appleciderimg_9193
Next, open your sanitized yeast packet with clean, sanitized scissors.

appleciderimg_9197
A typical packet of yeast is enough to brew 5 gallons. If you’re brewing less than that, toss it all in. Once the pack is open, you can’t save it. If you have more than one jug, try to add the same amount to each. It doesn’t need to be exact. What’s important is that its fresh and clean. Don’t worry about stirring – there’s no need it. [Note: if you read dry yeast packet instructions, it may say to rehydrate in water first. That may be important for a wine that may be higher alcohol, but for cider, it’s not necessary.]

appleciderimg_9211

Step 3: Capping and Storing

After adding the yeast, it’s time to cap the bottle off with a sanitized airlock. Push the airlock into the stopper, then fill it to the line with sanitizer or cheap vodka. (This will allow CO2 to escape the bottle, but keep any foreign substances from getting in.)

appleciderimg_9221
Now, push the stopper gently into the top of the jug. It only needs to be tight enough to keep dust out. If its still wet with Star San, it may want to slip out. Be sure to check it later and tighten (by pressing it down at the stopper) if needed.

appleciderimg_9257
Last, put it into a safe place (indoors!) and let it rest for at least a few weeks to ferment.

Waiting Days

Fermentation follows multiple stages:

  1. Multiplication – For the first 12-48 hours, it will look like nothing is happening. The yeast is building up its forces and getting ready to crush that sugar.
  2. Fermentation – Once the numbers are up, the yeast binge on all the sugar they can find. There will be a stream of tiny CO2 bubbles constantly for a few days to few weeks, and the pressure bubbles out of the airlock. The cider will turn cloudy because its so crowded with yeast. There may be so much yeast that they float and pile up in a beige layer (krausen) on top of the cider. This is all normal, and the party lasts at least a few days to a few weeks.
  3. Clarification – Once yeast have eaten all the sugar, they crash hard. When they sleep, they fall. Most krausen will sink. The cider will turn from cloudy to mostly clear over the next week or two. All the yeast will have fallen asleep in a pile at the bottom of the jug that could be up to an inch deep.

Depending on the type of yeast, amount of sugar, and temperature, this may all happen in as little as a week, or drag on for 1-2 months. Cotes des Blancs usually finishes in about 3 weeks. Once its clear, it’s time for bottling day. Bottling day is when you want it. It’s perfectly ok to leave a fermented cider in the jug for up to 3 months.

If Something Goes Wrong

  • 2 inches of beige foam – It may be alarming, but this isn’t a problem. Its yeast and this sometimes happens. If it’s coming out the top – clean, sanitize, and replace your airlock daily or twice a day if needed. It should stop producing mountains of foam in a few days. After a few weeks it will all fall to the bottom.
  • Sulphurous odors – This can happen too for a few days, and isn’t usually a problem. If the yeast are strained for nutrients, they may produce sulfur dioxide. Next time, add some yeast nutrient and hopefully it won’t happen. Usually the cider will taste and smell just fine a few weeks later.

Ok, we tricked you. Those aren’t wrong, but they frequently happen and can be alarming. Relax and wait a bit.
There are a few things to look for that can tell you that your fermentation has gone a little wonky…

  • Black, green, and white floaties – This could be mold. It will often appear fuzzy or change color as more grows. Give it a few weeks and if it spreads or is still there after 3-4 weeks, then the cider is probably going to taste terrible. By comparison – good yeast won’t change color and will fall down on its own. There’s no reason to drink bad cider so dump it.
  • Cider smells like a barnyard – If it’s been less than a month, let it sit another month or two. If it still does, then be extra careful to sanitize everything and be sure to use fresh yeast next time. This is probably due to wild yeasts. Dump the offending beverage.
  • Cider tastes like vinegar – It probably is. Be extra careful with sanitation and make sure you’re using fresh yeast next time.

appleciderimg_0244Bottling Day

Bottling cider takes a little longer than getting it ready to ferment (but both take less time than writing this post!) However, you can do it when you have time.

Step 1: Making a simple syrup for carbonation (optional)

This is completely optional. If you want a still cider, skip straight to step 2.
If you want sparkling cider, the first thing you need to do is sanitize some sugar. The yeast are just sleeping, not dead. If you add sugar, they’ll wake up and start partying again until the sugar is gone. If this is done under a closed lid, pressure builds up, and now you have a carbonated cider! But watch out – too much sugar = too mush pressure. Too much pressure could mean a bottle bomb.
So how much sugar? 1.5 tablespoons per gallon, or 3/4c for 5 gallons. I used an online calculator to figure out how much sugar to add. I entered my batch size (2 gallons), desired carbonation (2.25 volumes – that’s typical for a cider), and room temperature (70F). This recommended 1.4oz of table sugar. I measured that out on my scale, and got 1.4oz with 3 tablespoons of sugar.
Mix the sugar with an equal part water, then bring it to a boil for 1 minute. Cover it with foil or a lid, then leave it to cool.

appleciderimg_0212

Step 2: Sanitize the Bottles

All of the bottles need to be sanitized in Star San for at least 1 minute. They don’t need to be full, but every surface needs to be wet. Its easy to fill them part way up, swirl it around (swirled, not shaken), then gently poured out. The more Star San is agitated, the foamier it gets. Its easiest to sanitize all bottles at once, then start filling them.

appleciderimg_0222

Step 3 (optional): Add sugar for carbonation

If you are carbonating, split the sugar syrup evenly between the jugs. The yeast may probably wake up, start eating again, and making their presence known with bubbles.

appleciderimg_0232
Gently stir the sugar in, but try not to disturb the sleeping yeast at bottom. If you do, no problem, there will just be a bit more left in the bottles later.

appleciderimg_0240

Step 4: Fill Bottles

Pour or siphon the cider into the bottles, leaving 1-2 inches empty at the top. If a bottle is too full, it may not carbonate fully.

appleciderimg_0258
Wow, that’s a lot of yeast. It’s hard to get every last drop out of the jug without getting a bunch of yeast into the bottle.

There will be a layer of yeast at the bottom, try not to pour that into your bottles (or your friends will complain.) I typically use a siphon to fill bottles, which makes it easier to separate the yeast sediment. More on that below.

appleciderimg_0290
Once all of the bottles are filled, store them at room temperature for 2 weeks. Its best to keep them in a plastic box in case they leak or explode while carbonating. After 2 weeks, chill a bottle, open it up, and enjoy the results! If its not fully carbonated, wait another week or two before chilling and opening the other bottles and hopefully they will carbonate. If not, chill and enjoy it straight up or in a cocktail. Cider can be stored for 1-2 years and often improves over time.

Other Tools, Variations, & Scaling Up

A: Faster Bottling

Pouring cider into bottles is hard, and stirs up the yeast sediment. You don’t have to worry about the yeast – it will settle back out in the bottle after a week. However, its easier and faster to use an autosiphon and bottling wand. An autosiphon makes it easy to start transferring the cider out without pouring. A bottling wand has a pushbutton valve at the bottom. You put it in the bottle, push down, and cider starts filling the bottle. When it’s full to the top, lift the bottling wand up just a bit and it stops. Cap the bottle, and you’re on to the next one!
All of these should be available at your local homebrew shop, or online retailers.

B: Other Ingredients to Try

  • Sugar – if you want a cider with more alcohol and a drier finish, just add sugar. Unbleached organic is our favorite, but you can use any type. However, be careful with dark molasses – too much and it will get bitter. Yeast will turn almost all of it into alcohol, but some of the flavor remains. 1-2 pounds in five gallons of apple juice makes a great applewine.
  • Other fruit juices – you can use any fruit juice instead of or in addition to apple. Just be sure that it doesn’t contain any preservatives other than ascorbic acid (sometimes marked as vitamin c). Sulfites and sorbates will prevent yeast from fermenting and you’ll end up with vinegar or a bucket of mold instead of a delicious cider. Pasteurized, bottled juices are the easiest and safest to start with. Unpasteurized juice could foul the whole batch or even make you sick if it contains certain foodborne bacteria.
  • Stevia or Xylitol – if you want a cider to taste sweeter, try mixing in a bit of stevia or xylitol before bottling. Yeast cannot ferment it, so the flavor will remain in the cider.

C: Scaling Up

Brewing beer, wine, or cider at home is easy up to 5 gallons per batch. Whenever you buy yeast, you’re buying enough for five gallons. All you need is a bigger vessel, more juice, more bottles, and more friends to help drink it. When you buy a bigger fermenter, be sure to get something bigger than your batch size. I use the 8 gallon bucket from my local homebrew shop even though I’m only brewing 5 gallons (see picture C). Some yeasts intended for beer are “top fermenting,” meaning they like to pile up on top. If there isn’t room, it will foam up into the airlock and then out onto the floor, walls, or ceiling.

FAQs

How much alcohol is in my cider?
The short answer is – it varies. To find out, you need to know how much sugar was there before fermentation, and how much is left afterwards. You can measure this with a hydrometer. The hydrometer will have a chart, or you can use an online calculator to calculate how much alcohol was produced. This will vary batch to batch depending on ingredients, which yeast was used, and the temperature it was fermented at.

What are the laws surrounding homebrew in my state?
That’s a great question for the advocates at the American Homebrewers Association. They have a state by state list for the USA available online. If you’re outside the USA, look for advice from similar organizations working to promote homebrew in your area.

Will that yeast in the bottom hurt anything?
No. This is a delicacy known as Vegemite or Marmite that’s best enjoyed on toast with breakfast. You could buy it, or you could enjoy yeast on toast after your morning cider. Its up to you. Ew

How many times did this article mention “sanitize”?
About 100 times. Nothing else matters if the equipment is dirty.

Safety Husband is also pretty sanitary. Well, I hope you enjoy this post as much as I like drinking home-brewed cider. Please make sure to be safe with your cider experiments (including the drinking of said cider) and let us know how your batch turns out!

*We love sharing recipes and ideas with you, but trust you to take responsibility to do all projects safely and legally. Safe fun is the best fun.

AIM SHOW + TELL: A-Frame Canvas Card Wall

canvascardwall_IMG_0083
From 2014-2016 I chronicled my crafty endeavors on the site Adventures-in-Making. I’ve selected a few of those DIY’s, Recipes, and other posts to share on the site.

One of the best things about having “a summer off” is that I am slowly getting to the projects that have been stacking up, with the help and company of Safety Husband. As you’re probably aware, my hubby is a big woodworker and enjoys DIY projects. When he starts a job, he wants it to be done properly so he won’t start doing some of the projects if we don’t have the right materials. A few of the things he wanted, like a router table, seemed silly at first but then he explained the many router table uses and I understood why a woodworker would want one. Despite not being able to do all the projects I wanted to so, it still feels great to make forward progress, but it is INSANE how much I expected to have done in a couple of weeks.

This weekend I finally got to a pressing project, and built an a-frame portable card wall out of two canvases and some scrap wood. There are a million options when it comes to displaying cards, but I wanted something light-weight with a little character, and I think this project absolutely fit the bill.

canvascardwall_IMG_9878
Safety Husband makes a great arm model. Safety goggles not shown, but surely present.

Since these canvases were big (~30″ x 48″) they were reinforced on the back, so our first step was knocking those bars out. Fortunately they came out pretty easily with a couple of smacks from a mallet.

canvascardwall_IMG_9884
We decided to use some trim leftover from the shop, and ripped it (on a table saw) to be the same depth as the canvas. That left us a scrap that made a perfect lip for the front of the card rails. We cut the trim to fit inside the frame of the canvas.

canvascardwall_IMG_9891
Once all 10 card rail pieces and lips were cut, I glued and clamped them together and left them overnight to dry. Once they were dry, I used a semi-gloss white spray paint to cover all the green painted sides (all that would be visible from the front of the display.)

canvascardwall_IMG_0043
I made a mark along my frame every 9 inches to allow for enough room for the cards, and the occasional journal.

canvascardwall_IMG_0044
The shelf pieces ended up being a tight fit in the frame of the canvas, so I decided that wood glue would be enough to hold up the light weight of the cards. I put glue on the ends to mount into the frame. I also put glue along the long back of the rails to attach to the canvas and keep cards from falling behind the shelves.

canvascardwall_IMG_0050
I then gently put the rails in place, using a piece of scrap wood and a mallet to tap some of the tighter pieces in.

canvascardwall_IMG_0052
I used painters tape to secure shelves in that were more likely to shift around. Most were held in place by friction and perfectly measured cuts.

canvascardwall_IMG_0059canvascardwall_IMG_0070
When the glue had set, I finished by attaching the two canvases together with old door hinges. (The best hardware has a little character.)

canvascardwall_IMG_0109
I love the simple but rustic look of the a frame, and I adore how light weight and durable it is. It will soon find a home in a local store, and I’m excited to see how it looks.

canvascardwall_IMG_0092
I always get a sense of satisfaction when I finish a project like this, when I get over all the “What if I…” ideas and just get it done. This one is especially rewarding because I only used materials leftover from the shop and previous projects.

canvascardwall_IMG_0101canvascardwall_IMG_0091canvascardwall_IMG_0086canvascardwall_IMG_0097

What are you working on?