From 2014-2016 I chronicled my crafty endeavors on the site Adventures-in-Making. I’ve selected a few of those DIY’s, Recipes, and other posts to share on the site.
A while back my friend Susan made a bunch of simple paper flowers that found a home on a shelf in my store.
Every few weeks a kid would ask me about the flowers, and I would give them one and tell them to take it home and try to figure out how to make their own. Without fail the kid would stare at the flower until it was time to leave, and I could see the parents trying to work out what materials they needed to make it happen.
Sometimes they asked me to demonstrate, but mostly I just loved the idea that I had inspired a kiddo to use their imagination and ingenuity to make something fun.
I think this is a great project to do with kids of all ages, and you just need a few simple supplies to make it happen.
Supplies
• Scrap Paper – Anything from text weight paper, to light weight card stock will work. Big pieces will make big flowers, small pieces will make small flowers. Susan used some old book pages for her flowers, you could use wrapping paper, catalog pages, or anything really!
• Scissors
• Your favorite glue – I used Aleene’s Tacky Glue but Elmer’s would also work.
Step 1
Cut an oval out of your piece of paper. It doesn’t have to be perfect, but try to keep the corners rounded.
Step 2
Starting from one side, cut the oval into a spiral. You should have a pointed end on the outside, and a rounded end on the other.
Step 3
Take the pointed end, and fold it down toward the center of the spiral.
Step 4
Starting at that fold, begin rolling the paper into a flower shape.
Step 5
When you get to the center portion of the spiral, tighten the bloom up by twisting the paper around the folded piece.
Step 6
Hold the bloom in your hand, and apply a drop of glue to the folded portion you started the flower with, then
fold it over and hold it for a few seconds until the glue holds.
The whole process takes a couple of minutes, and gives you a lovely simple flower to brighten up your day. You can put them in a basket, like I did, hang them like a mobile, or decorate a table with them. They don’t fade, and the possibilities are endless!
So make a bunch and send us a picture of your creation for the DIY Craft Challenge this month! Or share your favorite flower craft.
From 2014-2016 I chronicled my crafty endeavors on the site Adventures-in-Making. I’ve selected a few of those DIY’s, Recipes, and other posts to share on the site.
I’ve been in a major cleaning and organization mood, so most of my projects have been focused on “using up” materials I have around. One giant project used a bin full of old printed t-shirts (I’ll show you when I’m done!) and I ended up with so many colorful t-shirt scraps that I over-ran my rag box. I decided it was a perfect time to combine those scraps, and the May DIY Challenge theme to make some simple jersey flowers.
After playing with the fabric for a day or two, I came up with two basic flower-making methods that you can use to make a whole army of blossoms.
• Shredding scissors, or other decorative edging scissors
• Straight pins
• Buttons
• Felt for leaves and backing. I used wide grosgrain ribbon.
• Pin-backs, bobby pins, or other clips to attach to the back
• Fabric Paints, or floss, or other decorating tools.
The Stitch & Draw-up Method
This is by far the quickest way I made flowers, and was also especially useful for adding details to the center of other flowers, or for making the smallest simplest bonus blooms to add to a flower bunch. The template includes two example petal shapes to play with, and a feathered shape that I used for a center detail. It works with basically any shape you want to use, though, so be sure to try your own ideas for rows of petals.
Step One
Cut the template shape out of a piece of jersey. (This is from the arm of a t-shirt.)
Then stitch a loose line starting close to one edge and ending close to the other.
Step Two
Put a stitch through the end you started on, to pull it into a ring.
Step Three
Pull both ends of the thread to gather the fabric into a round shape. Make sure the extra puckered fabric from below your stitch line if on one side of the flower.
Step Four
Take a couple more stitches through the puckered side of the flower (which will be the back side, tie your favorite knot, and cut the thread.
Step Five
Flip the flower over and add a button or other decoration. You can also stitch a clip or pin to the back side. I put a button in the center of this one by stitching through the middle of the bloom,
and added a couple of leaf-shaped pieces and a piece of ribbon to the back, by stitching them through the back of the petal.
Voila, a quick simple flower that I can use on a package, as a pin, or in my hair. (Or all of the above.)
The Pinch & Piece Method
This method takes a little more work, but I loved the way it makes a fuller and more complicated flower shape. I’ve given you four petal shapes to try on the template– each with a different number of petals per flower– but you can try all sorts of shapes for different results.
Step One
Cut the indicated number of petal pieces out of jersey material. For this flower, I also used the “Center Detail” piece from the other template page to create a fuzzy center for my flower (shown above in dark purple.)
Step Two
Stitch a loose line across the middle of each the petal (shown as a dotted line on the template) starting close to one edge and ending close to the other.
Put a stitch through the end you started on, and pull to gather the fabric.
Step Three
Bend the petal piece in half, and put a stitch in the fold. Then do the same to each petal to connect them all together. Tighten them together, and tie a knot at the first petal.
Step Four
Wrap your thread between each petal section to draw the center together and fluff the petals out. Then stitch through the back of the flower, & tie off the thread using your favorite knot. For the center on this flower, I used the “Stitch and Draw-up” method on my dark purple center detail piece, and then sewed through it and the center of my bloom. I attached a leaf shape and a piece of ribbon to the back like my first flower, and used that to bobby pin it in my hair.
I’ve started flipping through my flower books for inspiration, and I love the flexibility and the whimsy of using old t-shirts like this.
Soft, sweet, flowers.
Remember that if you do this or any other flower project, send us a picture to enter the May DIY Craft Challenge.
From 2014-2016 I chronicled my crafty endeavors on the site Adventures-in-Making. I’ve selected a few of those DIY’s, Recipes, and other posts to share on the site.
Showing appreciation isn’t always about buying something sparkly, or something chocolate. Sometimes it’s finding the right words to tell someone what they mean to you.
When I think about my mom, I think about all the little things she taught me to do. She taught me to look at things in a different way, to experiment. She taught me how to make teddy bear ornaments out of wallpaper samples, to sew tiny dresses for spool dolls, and to use my imagination. Add my grandmother into the equation and you’ve got all the creative forces that drive me today.
I decided that it would be fun to build a card that I could use to thank her for all the things she’s taught me. Since she also taught me to share, I thought I’d let you use it yourself.
I’ve attached two different ways that you can thank your mom for everything she taught you.
Customize your thank you by adding your face. Take a photo of yourself holding this 8×10 poster. (Your mom loves to see your smile.) Fill in the empty space with your special skill, snap a photo, and email it to your mom. Download the poster here.
Or cut out this mailable card-and-envelope-in-one and to send or hand deliver with a handful of wildflowers. You can download the free printable card here.
You’ll get extra credit for making something just for her, and you get to remember all the reason’s she’s the one you’re happy to call Mom.
From 2014-2016 I chronicled my crafty endeavors on the site Adventures-in-Making. I’ve selected a few of those DIY’s, Recipes, and other posts to share on the site.
The sun has made a couple of appearances, and when the sun comes out all I want to do is make paper. Why fight it? I’m always in a crafty mood so it makes sense to craft! Making paper and cards is one of my absolute favorite past times so I would never want to miss an opportunity to do so. I came across some of these gift ideas for card makers the other day and I couldn’t get the idea out of my head so I told myself that as soon as it was sunny, I would make some paper for my cards, and that’s exactly what I’m doing.
I decided to take the opportunity to make a bunch of plantable heart cards, using flower seeds and a simple pour-over paper making method (instead of my usual dip method featured here and here.) The pour-over method uses paper scraps and things that you probably have around the house; making this an awesome, kid-friendly, activity for a sunny afternoon.
Pour-over Paper Making Supplies
• Shredded scrap paper Mix your favorite color and white paper for the best results. You can use a shredder, scissors, or your hands to tear the paper into manageable bits.
• Smallish flower seeds I felt several packets of seeds before settling on a combination of chamomile, viola, and alyssum seeds. You can also give it a cooking theme by using tiny herb seeds.
• A “Deckle”- This will be the template for your sheet of paper. I used an inexpensive, wood, heart-shaped picture frame that I picked up at the craft store.
• 2 screens, slightly larger than your deckle- I used small pieces of window screen material from the hardware store. I have also had some luck with sheer curtain material and other porous fabrics.
• A blender
• A large bowl (or two)
• A wire cooling rack for support
• A rectangular cake pan to catch the runoff.
• A sponge or absorbent rag
• A couple of flat absorbent rags larger than your intended paper size.
Step 1: Making Paper Pulp
To make the pulp for your paper, first soak the shredded paper in water for a little bit. Typically I will dunk them all in water while I’m getting all my supplies together. Once they are saturated put a handful into your blender, with about twice that amount of water.
Then pulse your blender to pulverize the paper pulp. (If you feel like your blender is having trouble, add more water to your mix. The paper pulp quickly becomes thick sludge that’s harder to cut through. It’s better to err on the side of too much water.) When your mix is starting to look like a disgusting smoothie, open it up and take a look at the mix. I like to stop when the mix is a little bit chunky, but mostly liquified.
Step 2: Preparing your Mould
Stack the cooling rack, screen, and deckle on top of your cake pan. This is where you’ll be pouring your pulp in a minute.
Step 3: Mixing in the wildflower seeds.
Transfer your pulp from the blender to a pouring bowl. You will be using several batches of pulp, so pour just a little bit of your flower seed into the bowl and stir gently with your fingers.
Step 4: Pouring the Pulp
Slowly pour your pulp mixture into the deckle. The water from the pulp will run through the screen and leave you with saturated paper fibers in the shape of your deckle.
Fill the space completely by pouring, and (if needed) gently pushing the pulp into the corners of the frame with your finger.
Very gently, lift the deckle directly up towards the ceiling. (A note: One of the best parts about paper-making is that almost any mess up can be fixed by dumping the sheet back into the pulpy water, breaking it up with your hand, and starting over again. So if your shape doesn’t look right, or your get a tear or a bubble, just dump it back in and try again!) You will have a nice pile of wet paper mess.
Step 5: Drying the Paper
The final bits are all about drying the paper. Although much of the water falls through while you’re pouring, the fibers hold on to a lot of moisture. First, place your second piece of screen on top of the pulp and absorb as much of the water as you can by pressing gently with a sponge. This will flatten the pulp into something that looks more like a sheet of paper. (You can wring the sponge out into your pulp bowl, and dump the excess water in there that runs into your cake pan.)
The sheet is still delicate at this point.
Transfer it to a flat absorbent rag by flipping the whole screen onto the rag, and gently peeling back just the screen.
Next, place another rag on top, and press the paper gently with your fingers or a rolling-pin. You should start to see water in the shape of your card.
Use the same flipping method to transfer your sheet onto a surface that it can remain on to air dry. (I like to cover my dining table with bath towels.) Once you’re done making paper, you can dump the remaining pulp and water outside.
See! Paper!An army of plantable paper hearts!
Usually the paper will dry overnight, but may take a little more time in a damp or cold room. Once they are completely dry, you can decorate them however you please.
Since Mother’s Day is coming up, I decided to use one of my sheets as a card. I used the seed packets as inspiration and wrote a little message on the back, including directions for planting the card.
When you’re ready to toss out this card, plant it instead! It has a mix of viola, alyssum, and chamomile seeds– just cover with a little soil, water, and you might find yourself with a few new blooms.
Since every card needs an envelope, I decided to make a simple one from a paper grocery bag.
Simple Envelope Supplies
• A paper bag
• Your handmade paper deckle
• A Pencil
• A Ruler
• Scissors or craft knife
• Glue
Step 1
Open up the paper bag by cutting until you have a flat sheet. Place the deckle in the center and trace the inside with your pencil.
Step 2
To make your envelope guide, draw a box around your deckle shape, leaving about a quarter of an inch of space on each side. Extend the lines out from the box (as shown above).
Step 3
Cut the corner portions out of the form you drew, leaving a plus sign shape with your heart-shape in the center. Fold along each of the straight lines, and trim the flaps so that they overlap about a half an inch.
Step 4
Fold in one of the side flaps, then apply glue to the other side flap, fold it over, and do the same with the bottom flap.
You should have the perfect envelope for your card! Just slip it in, seal the last flap and send it to somebody special. (Remember that oddly shaped envelopes require more postage. Check with your post office for more details.)
I’m really happy with the way my card turned out, and glad that I was able to come up with another way to recycle materials I had already.
Now I have a nice stack of paper hearts packed full of flower seeds- what should I do with the rest of them?
From 2014-2016 I chronicled my crafty endeavors on the site Adventures-in-Making. I’ve selected a few of those DIY’s, Recipes, and other posts to share on the site.
I love playing with watercolors, I’m going to admit that right now. I love the way the colors run together, the little blotches of pigment, and basically everything else about it. I’m not a watercolor expert, which means that whenever the paint does something unexpected I have the giddy feeling that I just discovered something amazing. (What did I tell you? I love the process.)
My philosophy teacher in high school used to amazing things with watercolor, and I would always try to sneak a look at his paintings before and after class. One day I noticed him using something to cover up portions of the paper while he was working– cut to 15 years later and I finally decide to buy myself a little bottle of masking fluid to play around with. (I bought Winsor & Newton Colorless Art Masking Fluid.)
Still a little overwhelmed to jump in, I watched this introductory video, decided on a test project; and gathered my brushes, paints, and spirit of exploration.
A note: the first time I used the fluid, I ruined my brush. It was a cheap brush, granted, but after that I sharpened up and coated the next brush in dish soap before dipping it in the masking fluid. I coated the whole thing in the dish soap, then squeezed the excess out. (This video shows you how.) Trust me. It’s better that way.
I drew a basic outline of the words I wanted to mask out with pencil. After coating the brush in soap, and gently rolling the bottle of masking fluid to mix it up, I dipped my brush in and saturated it.
Bit by bit, I covered the words with the masking fluid.
All the lines are covered in the fluid now. I’ll be able to erase the pencil lines once everything is done.
I let the masking fluid dry COMPLETELY before I began to paint with my watercolor. (The dry masking compound feels like rubber cement. You’ll know it’s dry when it is only slightly shiny, and your finger does not stick to it.) The watercolor will not stick to the mask, so you will be able to see what you’re working with.
When I had finished my first layer of paint, I let it dry COMPLETELY, then added a little more masking to what would be the little abstract windows in the buildings.
Then I let those dry COMPLETELY (do you see a theme here?) before I went in and darkened all the fields of color.
When I was done working around my masked areas, and everything was dry, I lightly rubbed the masking agent off with the tips of my fingers. (This alone is worth the trouble. I love pulling glue off of things.)
Once the mask was off, and I did a little erasing, I had crisp white lines to work with.
The masked areas were pale enough to let me add a little light yellow watercolor. I love the way the white letters stand out.
Tips to remember
• Test out the water color paper you’re going to be using before you start your artwork. Some of the papers I tried stuck to the masking fluid terribly, and I had to tear the paper to get the dried mask off.
• Coat your brush in soap, or you will ruin a brush, and most likely the piece of paper you’re working on. The first brush started to pull the drying mask fluid back off the paper, and it totally ruined one of my projects.
• Let everything dry COMPLETELY before moving from fluid to paint, or paint to fluid. The fluid will cling to wet paper, or your wet paint and make a wet mess.
• Remember to have fun! Let that childish sense of wonder take over for an afternoon… and when you’re done experimenting, send us the outcome! April’s DIY Challenge is Watercolor, after all.
From 2014-2016 I chronicled my crafty endeavors on the site Adventures-in-Making. I’ve selected a few of those DIY’s, Recipes, and other posts to share on the site.
***
Every month we send handmade badges to our favorite DIY Challenge entries. Rachel has made most of them, because she’s a whiz, and I was too scared to attempt embroidery. When I finally sat down to try* I found myself enjoying the process, and realized that the little imperfections were just fine. They were evidence of my process, and the process is everything.
I’ve been thinking a lot about the little monsters that keep us from creating. The doubt that we feel about our talent and ability, the fear we have that what we make will be judged by others, the comparisons we make to those who we feel are more talented.
Well, those are my little monsters. They make it difficult for me to call myself an artist, even when people specifically ask me if I am. Even when I’m working on rearranging my studio to work better for the way I make things.
But here’s the thing. When I take a step back from my own insecurities I see that for me the value of art isn’t in the product; and it definitely isn’t in the value that someone else places on the product. All the value and happiness is in the making.
When I’m making something, I get to do all my favorite things. I solve problems, like what tools to use to get the result I want. I teach my hands to move in new ways. I explore the interaction of materials- the way certain paints soak into wood, the way paper is cut by different blades, the way it curls. I train my eyes to see the world differently, to take items out of context, to turn a stick into a story. I play with the sound of words in my head, the picture they can paint with a little touch of color.
So what if all that beauty in my head and in the world turns into something that no one understands but me? Who cares if the end product is less “art” and more evidence of exploration? The magic is the way I feel when I’m working.
What do you think? What part of making brings you the most joy?
*I used a lot of the techniques from Rachel’s Alphabet Hoop Art tutorial, craft felt, embroidery floss, and good ol’ creative drive.
From 2014-2016 I chronicled my crafty endeavors on the site Adventures-in-Making. I’ve selected a few of those DIY’s, Recipes, and other posts to share on the site.
A while back I took a calligraphy class from Tara Bliven, and it opened up a whole new world of drawing tools. Not only did I get to try out new tools and techniques, it was the first time a pen and nib really worked for me. (Sometime I’ll give my whole “It’s tough being a lefty” rant.) As a lefty I need to use a special Oblique Pen Point Holder to write left to right– but with a little practice I learned to use a plain pen and nib to draw with gouache.
All the dark blue lines on this piece were done with a pointed pen, the rest is watercolor.
What’s so great about drawing with gouache?
• You can draw any color you can mix, for cheap. Instead of buying half a million different markers, buy a primary set of gouache and mix the colors you love.
• Gouache colors are opaque, which means you can do light lines on a dark background.
• Skinny paintbrushes are a pain. Although some people *ahem, Rachel* seem to be able to make magic with a brush, I have no luck doing fine lines with a paintbrush. A pen works much better.
• Gouache mixes wonderfully with your watercolor projects (#diycraftchallenge)
• The quality of line you get with a pointed pen is awesome.
• You look like a total bada** when you’re using a pointed pen. Trust me.
For this piece, I put down a dark blue background in watercolor, then used gouache to add the white words and flourishes.
There is a little learning curve when you’re working with a pen and ink, and practice makes perfect. I like to do little doodles on scrap paper to practice my lines, play with color, and generally mess around.
Supplies
• Gouache– like this Winsor & Newton set.
• A pen holder– like this one from Speedball
• A pointed pen nib– I used a Nikko G pen for this project, but Tara also recommends the Brause EF 66 which is better if you’re not as heavy handed as I am.
• A dropper of distilled water.
• A couple of ratty paintbrushes for “ink” application, mixing, and cleaning.
• The rest of your usual painting tools– a paint tray or plate, a jar of water, paper towels, paper, pencil, etc.
To start, I put a drop little bit of gouache into my paint tray…
and add a couple of drops of distilled water. I add just a little bit of water to start, because it’s easier to add more water to make the consistency I want.
I mix my water with my paint until it’s consistent (using a cheap kids paintbrush). I like to play with different degrees of “wateriness,” more water means that the “ink” will be thinner and less opaque. Typically I used a mixture that’s about 3 parts paint, 1 part water.
To apply the paint/ink to the pen, I saturate a paintbrush, and slowly slide it against the backside (concave side) of the nib. The ink will cling to the nib and seem to fill it partially. When it seems full (this part takes some practice) I will gently point and shake the pen downward towards the tray to get any extra blobs of ink out before I start drawing. In some cases (like today), I will actually drop the extra bits of paint onto my paper, for fun.
Then it’s time to draw. I place the nib gently again the paper, concave side down, at an angle. Then I slowly pull the nib along, rather than pushing like a lefty with a ballpoint. (If you’re having trouble, check out one of the amazing tutorial videos on youtube- like this one.)
Unlike a normal pen or marker, a nib like this will need to be refilled rather frequently (using the brush method above.) I try to keep an eye on how much ink/paint I have in my nib so that I don’t run out in the middle of a line. When you’re using the nib, you’ll notice that the tip is made up of two pointed pieces. When there is enough ink, it looks like one point on the end, but when they start separating, I probably need more ink.
Periodically, I stop to rinse and scrub my pen. I dip it in my jar of water, and use a clean brush to scrub any dried bits of ink/paint off of it. Then I dry it gently with a rag or paper towel, reink, and go back to work.
For this doodle, I had both white gouache and blue gouache in my paint tray, and I went between the two when I was reinking.
Can you see why I like drawing with gouache? The possibilities!
I was inspired to pull out my gouache today by the April DIY Challenge: Watercolor. We’d love to see what the theme inspires in you, so pull out your favorite medium and tools and share with us!
From 2014-2016 I chronicled my crafty endeavors on the site Adventures-in-Making. I’ve selected a few of those DIY’s, Recipes, and other posts to share on the site.
You may or may not have heard of a saddle stapler– but let me tell you, I love this sucker. I mainly use it for binding small booklets, but it’s handy for any project that you need to staple further “in” than the 1-inch you get with a regular stapler. Plus they are heavy-duty, sturdy, and have lovely lines. (I’m not sure why I’m quite so fond of a piece of metal.)
My journals and booklets typical have about 10 sheets of text weight paper, and a 100# weight cover. I use a bone-folder to fold the inside sheets in half (with the grain) 3-4 sheets at a time for a crisp fold throughout. I like to score my covers before I fold them (also with the grain) to make sure that I have a nice smooth spine.
When I’m ready to bind, I’ll slip one side of the paper into the curved opening of the stapler, and the spine with lay smoothly along the stapling edge.
My stapler is a little picky about where it staples, so I usually have to hold the paper down with a finger on either side of the spine. Then I staple, trim, and voila…
Journals! (You might notice I used the corner rounder on these, as well.)
Although my saddle stapler isn’t very old, they have discontinued the model. You may be able to find this exact model online (it’s a Swingline 615 Saddle Stapler) you can buy the very similar Stanley Bostitch Booklet Stapler at Amazon*. Both use standard staples found just about anywhere, so you don’t need to stockpile anything.
The one feature that appears to be missing on the Stanley version is the measurement guide, a little piece of metal that can be adjusted to line up the staple location if you’re doing multiple books. I typically make a mark where my staples should go or eyeball it, so I seldom use the guide anyways.
If you love journals, or staplers, this is a must-have. If you’re in a pinch, and local, I might even let you use mine.
*Support Adventures-in-Making by shopping from our Amazon store. We’ve selected a few things that we love, and think you will too. If you purchase through us, you pay no more for those items, but we get a small portion of the sales to further the adventures.
From 2014-2016 I chronicled my crafty endeavors on the site Adventures-in-Making. I’ve selected a few of those DIY’s, Recipes, and other posts to share on the site.
I’ve been playing with black card stock a lot lately, which deposited a nice collection of paper scraps in my “use it this week or dump it” pile. I decided to use the Diy Craft Challenge as an inspiration to use them, and play with another thing that’s been catching my eye– quilling. (Although, in typical fashion I looked up a couple of tutorials on You Tube, promptly forgot what I learned, and did things my own way.)
Supplies
• A 5×7 Frame without glass, painted black to match the paper
• A print of a favorite letter, sized to fit inside the frame (I printed my letter backwards using a setting on my printer called “emulsion side up”. It works just fine to print it the right way round, you just might have to erase your tracing paper lines.)
• Black paper (I used 100# Cardstock)
• Tracing paper
• A piece of cork to pin to (A cork trivet like this works, or a bulletin board or pinning board. Styrofoam also works in a pinch.)
• Straight pins
• A few toothpicks
• Tacky glue
• A craft knife and ruler
First I measured the depth of the frame, and cut a bunch of strips of paper that width using a craft knife and scissors.
I cut the paper against the grain so that it would curl as evenly as possible. (Grain is very important, especially when working with thicker papers. For a little more about grain, and to find the grain on the paper you are using, check out yesterday’s post.) You will use less of the paper than you think, but it’s better to have too many strips of paper than too few! (I used about 15 pieces of 8″ lengths for mine.)
I used tracing paper to trace my letter onto a larger piece of black card stock,
then carefully cut it out with a craft knife.
Next step was to outline my letter with a strip of paper. I dipped a toothpick in a pond of glue and drew a light line of glue down the center of a strip of paper.
Then I slowly wrapped the paper around the letter, holding the piece down to give it time to attach. At sharp angles I either folded the paper (if I could) or tore the strip and started a new one there. This task is finicky, but forgiving. I found that as long as I went slow and worked with the paper, it turned out fine.
I made sure to outline the whole letter, then I gave it a few minutes to rest and dry.
Once it was mostly dry, I moved to my cork backing. I used straight pins to firmly place my black frame so that it would not shift around on the cork, and decided where I wanted my letter to fit in.
I applied glue with a toothpick all the places my letter touched the frame, then used pins to secure it as well. I set pins up against the letter wherever it felt like it might flex or slide.
Finnicky steps done, now to the decoration!
To make the various curls I used inside the frame, first I ran the strip against my nail to loosen it up a little. (Kind of like curling that terrible plastic curling ribbon) Then I wrapped it around a clean toothpick to get the size curl I wanted. I also played with folding then curling, curling multiple pieces, and curling different ways. I basically went curl crazy.
When I had a nice pile of curls to choose from, I was ready to place and glue them.
Gently I squeezed each curl in place, and used my glue-toothpick to apply glue to any place a curl touched another part of the piece. I left the space around the letter pretty open so that the R would stand out. When I had everything glued in, I let the whole thing sit for an hour to let the glue dry.
I really love the way these turned out. They’re crafty, but classy, and they are now hanging in our guest room for our two most frequent guests.
I bet you can do even better! You still have a few days to enter our DIY Craft Challenge by March 30th.
From 2014-2016 I chronicled my crafty endeavors on the site Adventures-in-Making. I’ve selected a few of those DIY’s, Recipes, and other posts to share on the site.
I’m working on a super fun tutorial for tomorrow, and I thought I would take a minute to share a tip about finding the grain in paper.
What is paper grain?
Very simply- Most paper is made up of long fibers that align parallel to each other, which means that the paper will be more flexible in one direction (with the grain) than the other (against the grain.)
Why is grain important?
If you work with paper at all, you will find yourself working or fighting with the grain of paper. Because the paper will naturally want to flex with the grain, it will behave very differently depending on the way it is cut. This is especially true when you are working with thicker paper or cardstock.
What direction is the grain of this paper?
I always test the grain of a paper before I start planning a project or working with it. Some people will tell you that the grain typically runs parallel to the long side of a piece of paper, but I’ve found several instances where paper is cut the other way.
To find the grain of the paper:
• Take the paper in your hands and gently flex it one direction, then rotate it 90 degrees and flex it again. Depending on the thickness of the paper, you may want to flex it until it’s almost folded.
• It should flex more easily one way. That way is called “with the grain”.
• Sometimes I will make a light pencil mark along the flex, to show me which direction the grain is running.
What’s the best way to work with grain?
Here are a few activities that you might do with paper, and how the grain should be aligned.
• Book Binding – Book covers and guts should have the grain running parallel to the spine. If the grain goes the wrong way, pages will be difficult to flip, and the cover may warp.
• Folded Cards – You should always fold with the grain, meaning that your fold will be parallel to the fibers of the paper. That way your fold will happen in between the strings of fibers, rather than breaking them.
• Quilling or curling – If you are cutting your own quilling paper, it’s a good idea to cut against the grain, which means you’ll cut the fibers of the paper shorter. The paper will curve more fluidly this way, and you’re less likely to get ugly creases in your curls.
• Resistance projects – conversely, if you want to play with the stiffness of the paper rather than curling it up, you should cut with the grain so you have long strong fibers. (This is the kind of paper I was working with for my paper bird project.)
• Gluing – if you are duplexing, mounting, or otherwise gluing two pieces of paper or paperboard, you want to make sure the grain direction is the same for each piece. When paper is introduced to moisture from glue or even from the air, it will start to curl one direction. You want the grain direction to be the same on both pieces so that they don’t pull on each other.
• Tearing – Paper is always easier to tear along the grain (because you are pulling strings of fibers away from their neighbors instead of tearing them in half.)
What happens if you ignore the grain?
Terrible things! Books that don’t flip! Warped duplexed paper! Rough folds on your cards! Bends and creases where you don’t want them!
Know the grain. Respect the grain. Keep making stuff.
How do you play with paper? Does the grain effect you?
.)
to write left to right– but with a little practice I learned to use a plain pen and nib to draw with gouache.
set.
at Amazon*. Both use standard staples found just about anywhere, so you don’t need to stockpile anything.
You must be logged in to post a comment.