AIM DIY: Add a Kitten Pocket with Polish Remover and Sharpies

September 5, 2016October 28, 2020 | Alison - Adventures-in-Making

From 2014-2016 I chronicled my crafty endeavors on the site Adventures-in-Making. I’ve selected a few of those DIY’s, Recipes, and other posts to share on the site.

I like to “joke” that I have a kitten biological clock. Every couple of years I start thinking about how much fun kittens are, and how cute, and how nice it would be to have the pitter patter of little feet.

Dangerous.

To nip this in the bud this year, I’ve signed up for some future fostering, and came up with this little kitten pocket to bridge the gap. It’s based on a picture of Wee Cooper (our last kitten) and I thought I would share it so you can all have a kitten pocket of your very own.

Supplies

Cotton Tote that ~~kneads~~ needs a kitten. It’s important to use cotton or another natural material because acetone can eat through a lot of synthetic materials.
100% Acetone finger nail polish remover.
Cotton pads, balls, or rags.
Bone folder or similar tool for burnishing
Masking Tape
Sharpie Markers – Black and Silver
This kitten template* printed with a laser printer or copier. Use the reversed image on the right for transferring.

Step One: Printing and Prepping Your Template

Use a Laser Printer or Copier to print the Kitten Template* on a normal sheet of paper. Black and white is fine. It’s important to use a printer or copier that has TONER instead of ink. The transfer process with move some of that toner onto the fabric. If you try it with ink you’ll end up with a mess!

If you don’t have access to a toner-based printer or copier, or this process doesn’t work for some other reason, never fear! You can use a light table to trace the kitten on your bag, or use transfer paper to apply the design. You can see examples of those processes here and here.

After you have printed your page, cut out the cat and pocket on the right, leaving a large border.

Step Two: Layout Your Design

Decide where you want to put your kitten, and tape it firmly face down on your bag. Make sure everything is as straight and tight as you can make it.

Step Three: Blot and Burnish

Saturate a cotton pad with acetone, and press it into the paper. You will start to see the design through the paper. Saturate a small portion of the design with acetone, then switch to burnishing with your bone folder. Rub the side of the bone folder on the paper to press it firmly down into the fabric. Repeat on small sections of the design, then go back over each portion one or two times, adding more acetone and pressure.

If you can, peak to make sure that you have transferred the kitten. If not, you may want to repeat the process with more acetone and more pressure. If you see the design, move to the next step!

If you don’t see anything at all, there’s a chance your printer won’t work for this process. Don’t fear! You can use a light table to trace the kitten on your bag, or use transfer paper to apply the design. You can see examples of those processes here and here.

Step Four: Fill it in

If you used a smooth material and have a good transfer you could skip this step altogether– it’s up to you. If you’d like, use a black Sharpie to darken in the design. You can use the left side of the template as a reference for portions you can’t see as well on the transfer.

When you have the kitten filled in, use a silver Sharpie to add in the whiskers. It will show up on the black of the kitten and on the light bag as well!

When you’re done let it dry for a couple of minutes, pile all your stuff in it, and take a kitten everywhere you go.

Purrfect.

*Kitten template includes an original illustration by Alison Lang. We’re happy to share files for personal and educational purposes, but please don’t use it for anything else without our permission. Thanks!

AIM DIY: Recycled Rainbow Mobile

August 9, 2016October 28, 2020 | Alison - Adventures-in-Making

From 2014-2016 I chronicled my crafty endeavors on the site Adventures-in-Making. I’ve selected a few of those DIY’s, Recipes, and other posts to share on the site.

Rainbows are amazing. They’re awe inspiring in the sky, they are a great way to organize things*, and they are just plain magical.

This little recycled rainbow mobile tries to be a few of those things- and has the added bonus of being a nifty reason to doodle.

SUPPLIES

Thin plastic boxes and containers- like those that salads come in
Scissors
1 1/2″ Diameter Circle Thick Material Punch from Fiskars
Colorful Permanent Markers like Sharpies
A scrap ring, one cut from a plastic container lid
Thin string or baker’s twine
Thread
Safety Pin or Awl
Ruler

Use the thick material punch to cut circles out of every piece of plastic you can find. Don’t worry, the idea of using recycleables for art will make you look insane. Embrace it. (;

Use your rainbow of markers to doodle decorations on each circle. It’s okay if you have an uneven amount of some color because you think orange is terrible, just have fun!

Tie three strings to your top ring, and tie those three together to hang the ring parallel to the ground. Find a place to hang this ring while you work.

Choose one of your most popular colors (purple for me), and poke a small hole near the top of each piece with a safety pin. Cut a piece of thread approximately 12″ long, and string it through one of the holes. Tie the ends of the thread together, and attach it to the hanging ring using a lark’s head knot. Repeat this for each circle of this color.

Choose the next color in the rainbow (blue in my case) and poke each piece like you did before. This time add two inches to your thread for a length of 14″. Attach each of these pieces to your ring.

Continue by adding 2 inches to the length of each new color until you have tied all of your pieces to the ring.

When you have finished, hang it in a bright window and watch it sway and catch the light.

See, sometimes trash-art is fun!

*I may or may not be one of those people who sorts books by color. My librarian mother may be driven insane by this fact.

AIM SHOW+TELL: Spray Paint a Briar Rug

May 4, 2016October 28, 2020 | Alison - Adventures-in-Making

From 2014-2016 I chronicled my crafty endeavors on the site Adventures-in-Making. I’ve selected a few of those DIY’s, Recipes, and other posts to share on the site.

There once was a girl named Alison who had an awkward entry space and no good options. She went searching for a rug to protect what was left of her ugly carpet. She went to store after store with no luck, instead bringing home a rug that was so bland it made her cry.

No really. I could find NOTHING that I liked. Everything was either too small, too bold, to “contemporary”, or too “tempting for a cat to destroy.” I decided that bland was better than something that was REALLY not me. However, I got inspired buy the rugs Bazaar Velvet creates and I grabbed a can of spray paint.

This month’s theme was a great chance to embrace my inner subtly-secret-goth-girly-girl and decorate the rug with a few briars (á la Sleeping Beauty, or Briar Rose.)

I used Con-Tact paper to make a mask for the rug. I cut a bunch of free-hand curved pieces, and laid them across each side of the rug in a random arrangement. When each piece was in a location I liked, I stepped on it to adhere it to the rug firmly ( are an awesome tool, too!) Once I had the stems all lined up, I began to decorate each with triangles of thorns.

When I was happy with everything, I sprayed a thin layer of white all-purpose spray paint across the rug, paying special attention to the edges of the mask. Then I tortured myself by leaving the whole thing to dry a few hours before removing the mask and seeing what it was going to look at.

After those couple of hours, I gently peeled the mask material off of the rug…

and had the big reveal.

After airing the rug out overnight, I put it in place in my entry space.

No more bland rug!

Here’s a word of warning: This was so fun and transformative that I want to spray paint everything in the house now.

I’ve got my eye on you, dining rug… what do you think about circles?

AIM DIY: Patio Friendly Pile-Up Cushions filled with Styrofoam Peanuts

May 3, 2016October 28, 2020 | Alison - Adventures-in-Making

From 2014-2016 I chronicled my crafty endeavors on the site Adventures-in-Making. I’ve selected a few of those DIY’s, Recipes, and other posts to share on the site.

The weather was nice for a few days in April, uncharacteristically, and began the countdown to the Pacific Northwest Summer. Ahhh; the handful of blissful weeks that makes you fall in love with the trees again, and wipes the memory of the last 8 gray months.

Safety Husband and I have been trying to be more mindful, and that extends to the way we interact with our home. We are who we are [not catalog people] and we want everything at our house to be conducive to the way we live. We have several outdoor areas that would make great external living spaces, but we haven’t done a great job of outfitting them for the task.

All this to explain why I decided I needed to make a giant pile of outdoor cushions that I could lay upon like the Princess and the Pea. I wanted them to be cheap, washable, refurbishable, and also work with our inside decor. Fabric and wood don’t do well outside over the Seattle winter, and I can’t store things in out non-existent storage space. So I put together a handful of pillow forms from scrap material, filled with recycled styrofoam peanuts; then covered them with painted canvas covers. In one afternoon I had 7 assorted cushions, and dreams of the perfect summer.

SUPPLIES

Fabric scissors and optional pinking shears
Sewing machine and thread
Pillow Form Fabric: approximately 24″ (2/3 yard) of 45″-wide lightweight scrap fabric per pillow
Pillow Cover: approximately 24″ (2/3 yard) of 52″ to 60″-wide canvas-type material per pillow
Styrofoam Peanuts: about a grocery sack full per pillow. Make sure that you are using styrofoam peanuts instead of the cornstarch ones that melt under water. Imagine the mess!

DECORATING SUPPLIES

Tulip Color Shot Fabric Color: I used Teal, Blue, and Green.
Scissors
Tape: masking, packing, cello, washi. Whatever you want!
Con-Tact Paper: A great option for cutting out larger masks or covering more material.
Decorative punches and scissors
Compass, or fun shapes to trace

Step 1: Making the Pillow Forms

Take your scrap pillow-form material and fold it so that the selvedged edges touch. Cut the other two sides with pinking shears so that you have an approximately 23″ square (45″x23″ unfolded.) Sew a 1/2″ seam along the two pinked edges, then do the same for about half of the remaining side.

Fill the form about halfway full with peanuts, then sew the opening closed to seal your pillow form.

Hire a professional to test the security of your stitching.

Repeat until you have run out of material. (I made 7 pillows so that I could make a GIANT PILE.)

Step 2: Making the Pillow Covers

There is dirt outside, so you want to make sure that your pillow cover can be easily removed and laundered; this also means you want to pre-wash your fabrics so there is no future shrinkage.

Cut your fabric to about 23″ wide. With the back side showing, fold the width of the fabric into a tube about 22″ wide. The overlapped pieces will make the flap for inserting and removing your pillow form.

Stitch up the two open ends of your tube approximately 1/4″ in.

Then turn the cover inside out using the open flaps. Make sure to press the corner all the way out with your finger or a pencil.

Stitch around the outside edges of your pillow cover, about 3/8″ in- then you’re done!

Step 3: Decorating the Cushions to Match your Life.

Decorating the pillows was definitely the biggest fun in this project (other than sitting in the sun on the cushions later.) If you’re a selfless person, you could share that fun with your family and friends, and let each person design a mask for their own pillow. Masking the pillow is as easy as using tape and scissors. Build shapes out of strips of tape, or cut shapes out of contact paper. (ABOVE: I used a compass to draw circles, then cut and arranged them on the front of my cover.) You could have the initials of everyone in your family, silhouettes of your pets and favorite animals… anything really.

Once you’ve settled on a masked design, take it outside and spray it down with your fabric spray paint. (I used Tulip Color Shot Fabric Color which is washable and flexible.) Remember that spray paint doesn’t ever go on consistently, so embrace the irregularity and leave some patches lighter than others.

After you’ve got a nice coat of paint on, let your cover dry for an hour or so before pulling off the mask.

Then let your covers air out for a few more hours.

When everything is dry (not sticky or smelly) you can put your pillow forms into your covers. Slip the form into the open flap, then push it down under the inner over-lapping flap. Press the corners of the form into the corners of the cover and shake and stomp it until everything looks nice.

Then build the tower of pillow on which you will reign.

Or, you know. Share with your friends.

Wheeee! Pillows.

AIM SHOW+TELL: A Rainbow of Faux Embroidery

February 4, 2016October 28, 2020 | Alison - Adventures-in-Making

From 2014-2016 I chronicled my crafty endeavors on the site Adventures-in-Making. I’ve selected a few of those DIY’s, Recipes, and other posts to share on the site.

I have spent quite bit of time working on my studio lately, and in the process have embraced a few truths about my personality. 1-I like to turn chaos into order 2-I love clean visually simple spaces with little subtle details 3-Rainbows are the best.

With that in mind, I set out to turn this basic curtain (that hides the closet that houses the clutter) into something a tiny bit more special.

To be honest, I had been thinking about making some changes in my studio for a while, and the bifold doors to my closet were in desperate need of sprucing up. I did some research online and apparently you can replace slats of bifold doors relatively easily with fabric these days so I considered removing the old slats and replacing them with some new material.

However, in the end, I decided to simply refresh the curtain that the doors hide behind. I might still replace the slats on my bifold doors at some point in the future, but, for now, I am really happy with how the curtain turned out.

Anyway, I have an absolute wealth of Sharpies, and I decided to use them to doodle a faux-embroidered rainbow trim across the curtains.

First I cut strips the length of the curtains and about 8″ wide to doodle on.

I ironed under the raw edged, and put a seam down the middle as a reference point for the decoration.

I then gleefully sorted my Sharpies by color (to understand my glee, see points 1 and 2 above) and chose the best colors for my rainbow.

I divided the length into a small portion for each color, and made a light mark where each color began and ended.

Overlapping those marks a bit, I began to draw shapes with small dots and dashes– mimicking the stitches on decorative embroidery pieces. I used a lot of botanical shapes (cause I love ’em) and tried to break up the space with a lot of variety.

When I had the strips all filled up with decoration, I pinned them to my curtains, and used a simple zig-zag stitch on my machine to attach them for good.

I really like the little touch of color this added, and it was tons of fun to doodle inch-after-inch of floral rainbow.
One day I’ll show you some of the other rainbows I’ve captured in here…

Cause they’re the best.

AIM DIY: Photo Album Pop-up Ornaments

December 17, 2015October 28, 2020 | Alison - Adventures-in-Making

From 2014-2016 I chronicled my crafty endeavors on the site Adventures-in-Making. I’ve selected a few of those DIY’s, Recipes, and other posts to share on the site.

Okay. I’ll admit it. I have possibly been making too many ornaments.

The floor is covered in little bits of paper, the ribbons are everywhere, and cat is oh so happy. (Happy and thus in the background of many of my photos.) I can’t help it. I’ve given myself over to the ornament bug, and even though I’ve told myself that these are ‘just this year’s ornaments’, I’m not sure I’ll have the self control to throw them all away.

I need a crafter help line… or maybe I can just spread the decoration disease and have you all join me in the madness. (*evil laughter*)

My sister recently handed over a large bag of family photos, and after the proper period of mortification I decided that I needed to do something with them. The best part about being in charge of photo projects is that you can include only adorable pictures of yourself, and edit out the slightly more awkward times.

I pulled together a selection of photos of family that yelled “HAPPY HOLIDAYS, Y’ALL!” Scanned and shrank them, then pulled out a few basic tools to turn the faces I love into ornaments I’ll cherish.

SUPPLIES

Resized photos printed on medium-heavy weight paper
Extra colored paper or cardstock
Medium to large hole punches– any symmetrical shape will work, I used circles and ovals
Ribbon or string
Buttons, bells, or beads
Paper glue or adhesive

To begin I punched my favorite people out of my favorite photos, and the same number of circles out of cardstock. Then I chose between 4 and 6 of my favorites, the same number of solid circles, and folded each in half– top to bottom.

I chose a button than matched my cardstock, then cut about 16 inches of string and fed it through the button.

I used my Scotch ATG gun to apply adhesive to each folded piece (glue works too).

I attached each piece to the one before it in a stack, alternating photos and cardstock. (Make sure that you don’t accidentally glue your sister in upside-down. She wouldn’t like that. All photos should point the same way.)

I laid the string and button across the spine of my stack (button on the bottom), added a little adhesive to one of the folded pieces, and attached the top and bottom piece to form a ball shape.

Then I fed another button on above the ball, tied a knot, and fluffed open all the pages.

I love how simple they look from far away, but each page is a memory of the holidays and of my family.

I did a few variations, using different punches, and combining shapes on one ribbon; but they are all put together the same way which means I could spend more time remembering good times than obsessing over the process.

It also means it’s a great project for kids, who might get a thrill out of punching holes out of photos.

and keeping them forever.

AIM DIY: Playing Card Ornaments

December 10, 2015November 7, 2020 | Alison - Adventures-in-Making

From 2014-2016 I chronicled my crafty endeavors on the site Adventures-in-Making. I’ve selected a few of those DIY’s, Recipes, and other posts to share on the site.

An old deck of cards in one hand, and the perfect Christmas Tree outside… something weird’s gonna happen.

We love games at this house. Card games, board games… you name it. I love to buy my children card games for Christmas or on their birthday as we love being able to play games with each other as a family. There are so many different card games out there that 8 year olds love to play with and so I try and find ones that are suitable for their age. We enjoy playing with them that much that I’m replacing them more regularly than I’d like to be. I don’t love worn-out cards, though, so I’ve been looking for a clever way of getting rid of a couple of our older decks. After playing with strips of paper as Christmas ornaments, I started thinking about ways to turn flat cards into 3-d shapes. Internet searches gave me a few options, including this great tutorial for making ornaments out of MTG playing cards. After following the tutorial, I made a couple of tweaks and ended up with another great collection of ornaments for our outdoor holiday tree.

Supplies

A deck of cards
Thin-ish wire: I used 22 Gauge floral wire
Assorted beads or buttons: Make sure the wire will fit through the holes.
Wire clippers and pliers
Craft knife or paper cutter
Awl or large needle for piercing cards
Ribbon or string

To begin you will cut several playing cards into 1/2″ strips. Choose 16 of those pieces to turn into your first ornament.

Poke a hole, at the bottom and top of each piece, approximately 1/4″ from the end. (You should be able to pierce through multiple cards at once.)

Trim a length of wire, approximately 10″ long, and put a small loop in one end. String at least one bead as a stopper, then start feeding your card pieces on, one at a time. This will be the bottom of your ornament, and the side showing from the bottom (shown above) will be the side of the card facing out on your ornament.

IMG_3527_playingcardornaments — The red side will be hidden on the inside of this ornament.

Once you have all your card pieces fed on the wire, add about 1-1/2″ of beads as spacers.

Starting with the bottom piece of card, gently feed the wire through the pierced hole at the other end.

Do the same with the next lowest piece of card, letting it rest against one side. Repeat with the next lowest piece of card EXCEPT let it rest on the other side of the center.

Repeat this action on each piece, going back and forth between each side of the ornament. It should begin to form a sphere.

There should be just enough space to feed the last (most interior) piece through. If you feel like the pieces are too cramped, you may want to gently tear a piece or two off your wire.

When you have all the pieces wrapped back around, add another bead or two, make a loop in the wire, and trim. Feed a ribbon through the loop, and you have a nifty ornament!

Other things to try

Make the spacer inside the ornament longer for a more spherical ornament, or make it shorter for a more compressed “space saucer” ornament. The different shapes will need a slightly different number of card pieces, but I’ve found that they all use between 14 and 16 pieces.
String two ornaments on the same wire for a more complex shape.
Mix and match back pieces and front pieces for a striped pattern.
String an extra piece of beaded wire or string to the bottom of the ornament for even more decoration.
Go crazy with bead spacers and see what happens.

What do you think? Trash to treasure?

AIM DIY: Scrap Paper Strip Ornaments

December 3, 2015October 28, 2020 | Alison - Adventures-in-Making

From 2014-2016 I chronicled my crafty endeavors on the site Adventures-in-Making. I’ve selected a few of those DIY’s, Recipes, and other posts to share on the site.

***

Up until the last couple of years, Safety Husband and I would go home to Texas for the holidays, and we never felt the need to decorate for the season. For the last couple of years we’ve talked about decorating the “Christmas Tree” that just happens to be growing in our upper yard, and this year we’re making it happen. I’ve been putting my brain power into making ornaments that are either weatherproof, or are meant to be thrown away in January. It’s been a great chance to work through some of the materials I’ve been… ahem… collecting.

I love vintage ornaments and paper, and after a couple of years of experimentation I was ready to combine those two loves in this one ornament design. Super quick, because they are held together by staples, a couple of basic techniques can build a whole tree’s worth of decoration.

Supplies

Stapler
Ribbon (3/8″ to 1/2″ wide is great)
Scrap Paper: I used leftover 12×12 scrapbooking paper, but catalog or magazine pages would work well too! If you’re using thin paper, you might want to double up on the number of strips per ornament.
Clips: binder clips work great for this, but a clothespin will work in a pinch. (Pun intended.)
Scissors

To begin, cut about eight 1/2″ strips off your paper. (You can vary the number, just make sure you have an even number of strips.)

Cut a length of ribbon about twice the length of your paper strips.

Fold the ribbon in half, and stack half the strips on each side. Staple near the bottom of the stack, away from the loop of ribbon.

The staple will go through all the paper and the ribbon, securing that point. (Staples must be cheating, because they make this too easy.)

Put a clip about halfway down the paper, clamping the whole stack of paper and ribbon. With one hand, hold the clip, and with the other gently pull on the loop of the ribbon.

This should cause the paper to pooch out a little on the other side of the clip. Repeat the holding and pulling step, but this time grab the ribbon loop and the two strips of paper closest to it on either side.

Repeat again and again, adding another strip on either side, until you reach the outer strip.

Then carefully put a staple through the area the clip was holding.

Trim any excess paper with a pair of scissors.

If you want, you can curl some of the extra paper to add a little decorative detail. Simply roll the paper around a small pencil or paintbrush to curl it.

Once you get the hang of the whole pull method, you can shake things up by doing a similar technique, upside-down.

Staple in the middle of your ornament, and turn each strip back down. Once you’ve turned each strip, staple them at the bottom to form a heart shape.

Using these two techniques you can make a whole range of funky vintage ornaments.

If you get sick of looking at the staples, you can replace them with a couple of stitches. Simply poke a hole in the middle of the stack, and make stitches back and forth to secure the ornament.

Remove the staple, and you’ll never know it was there.

Or spend that time making a whole army or ornaments. It’s up to you!

One set down, more to go.

AIM DIY: Simple Trees for Your Chipboard Forest

December 2, 2015October 28, 2020 | Alison - Adventures-in-Making

From 2014-2016 I chronicled my crafty endeavors on the site Adventures-in-Making. I’ve selected a few of those DIY’s, Recipes, and other posts to share on the site.

Even before I was done building little chipboard houses I knew they would need a little setting to live in. I wanted to come up with a simple and flexible tree template that I could make a whole forest out of. Inspired by my old paper bird project, I used strips of chipboard to build these trees.

Supplies

Scrap chipboard: from the backs of notepads or boxes. My pieces were 8.5×11″
You favorite paper glue
Clothespins or clips
Craft knife
Scoring Tool: a bone folder or dull knife work great

I began by making two score lines along the long side of the board, at .5″ and at 2.5″.

Then I cut two pieces, 1″ wide, off the other side for the trunk of my tree. The remaining piece of chipboard had my score marks on it, and I trimmed it into 1″ pieces (each piece has the same score marks).

I applied glue to the trunk pieces, and clipped them together to dry.

While the trunk glue was drying, I folded each of my small pieces along the score marks, forming an L.

Piece by piece, I applied glue to the .5″ flap and the top of the L…

then clipped them to the trunk. In this picture you can see that I folded the two pieces of the trunk away from each other at the base; this will allow the trees to sit by themselves.

I continued to add tree pieces until I liked what I saw (typically between 2 and 4 tiers), holding each piece with a couple of clips.

When I was happy, let the glue sit overnight, held by the clips. (Happy little trees, as the man said.)

On some I trimmed the top a bit, some I left tall. I love the way the variety turned out. These would be great with snowy glitter added, or paint. I’m just happy to have a forest for my little chipboard houses.

Trees for the little paper world.

Yes, I know I sound crazy. Now go make something!

(;

AIM DIY: Chipboard Village with Free House Template

November 20, 2015October 28, 2020 | Alison - Adventures-in-Making

From 2014-2016 I chronicled my crafty endeavors on the site Adventures-in-Making. I’ve selected a few of those DIY’s, Recipes, and other posts to share on the site.

***

You might have noticed things have slowed down a little over here at A-I-M. Life goes in cycles, as we know, and unfortunately it’s been tripping us up lately. I’m still making things (some of them more therapeutic than others- like the DIY below), but the timing is tricky, and sometimes things don’t make it online as quickly as they should. We’d like to ask you to be patient with us, and give us time to refresh and collect ourselves. We’ll be back to full speed before you know it.

I’ve been trying to simplify my life because I have accumulated too many “things”; and I’ve made a resolution to truly embrace the making of things, rather than the buying or the keeping. (Our house is getting smaller by the second. Someone’s cursed us, I swear!)

So rather than storing ornaments, sparkles, trees and lights, I’m making new temporary baubles from recycled materials.

With that in mind I sat down to make my version (sweet and simple) of a winter village. I built a template that you can use to start your own winter wonderland, and I hope you’ll get as much peace and joy out of it as I did.

Supplies

Scrap Chipboard: I like to save the backs of paper pads for projects like this, or you can grab a food package out of the recycling.
Pen and pencil
bone folder or scoring device
Craft knife
Paper glue: Elmer’s works great!
The printed template: click here or on the pdf below.

Chipboard is great because you can mark it simply by pressing down hard on it. To trace the template on my piece, I clipped the paper down, then…

used a bone folder and ruler to score the dotted lines (that will eventually be folded).

Then I traced over the rest of the lines by pressing down firmly with a pen.

Once I finished tracing all the lines I had a faint guide to work with. (If you like, trace the lines lightly with a pencil to help when you’re cutting.)

Like most cutting projects, it’s easier to start by removing the small pieces of the template. In this case that meant cutting out the windows, the notch on the back, and two sides of the door. (Refer to the template to make sure you are cutting only the solid line pieces.)

When I had the building and roof all cut out, I used a bone folder to score the folds a little more deeply. Then I began folding each flap gently away from the score mark. (Including the roof piece.)

When I had the main part of the building folded, I applied glue to the flap (shown in gray on the template sheet) and held the pieces together until the glue held firmly. (You can also use clips or clothespins to hold it closed for a bit.) Once the base of the house was holding firmly, I added glue to the roof flaps (also shown in gray) and aligned and attached the roof. (You will want to hold this together by putting your hand into the house-box and pressing the flaps against the roof.)

To frost the windows, I took a piece of cello tape slightly larger than the window, and attached it to a piece that was even larger. Then I taped that frosted pane right into the window-sash. I left the door bent slightly in, to welcome little chipboard guests!

Now that you’ve got the hang of home-building, you can reuse this template by resizing it, or come up with your own design!

For my second building, I used the natural folds in a cracker box, and drew windows and a door with a pencil before trimming it out. Remember to leave flaps to attach the roof! (But in a pinch, a piece of tape will work as well.) Simply erase the lines, glue everything together, and plop it into your village… and when it gets dark…

slip a few LED Christmas lights under your buildings for ambiance. (The notch I included in the template is super handy for running the wires out the back of the house.) Make sure to use low-heat lights, since they will be surrounded by paper!

If you’re anything like me, you won’t be able to stop at chipboard houses. I really want to add some chipboard critters… These little houses make my imagination run free.

One thing that’s for sure, they need to be surrounded by a forest. Next week I’ll show you a quick and easy way to build your own magic woods.

One note: I’m a big fan of letting the materials show in my projects, but remember you can camouflage the materials quickly by adding a little paint (spray or acrylic would work great) or by using it as a base for decoupage or collage (like our shadowbox project). Go crazy!

So, There.

So There Letterpress and Stationery Studio in Issaquah

decoration

AIM DIY: Add a Kitten Pocket with Polish Remover and Sharpies

Step One: Printing and Prepping Your Template

Step Two: Layout Your Design

Step Three: Blot and Burnish

Step Four: Fill it in

AIM DIY: Recycled Rainbow Mobile

AIM SHOW+TELL: Spray Paint a Briar Rug

AIM DIY: Patio Friendly Pile-Up Cushions filled with Styrofoam Peanuts

SUPPLIES

DECORATING SUPPLIES

Step 1: Making the Pillow Forms

Step 2: Making the Pillow Covers

Step 3: Decorating the Cushions to Match your Life.

AIM SHOW+TELL: A Rainbow of Faux Embroidery

AIM DIY: Photo Album Pop-up Ornaments

SUPPLIES

AIM DIY: Playing Card Ornaments

Supplies

Other things to try

AIM DIY: Scrap Paper Strip Ornaments

Supplies

AIM DIY: Simple Trees for Your Chipboard Forest

Supplies

AIM DIY: Chipboard Village with Free House Template

Supplies