AIM DIY: Patio Friendly Pile-Up Cushions filled with Styrofoam Peanuts

May 3, 2016October 28, 2020 | Alison - Adventures-in-Making

From 2014-2016 I chronicled my crafty endeavors on the site Adventures-in-Making. I’ve selected a few of those DIY’s, Recipes, and other posts to share on the site.

The weather was nice for a few days in April, uncharacteristically, and began the countdown to the Pacific Northwest Summer. Ahhh; the handful of blissful weeks that makes you fall in love with the trees again, and wipes the memory of the last 8 gray months.

Safety Husband and I have been trying to be more mindful, and that extends to the way we interact with our home. We are who we are [not catalog people] and we want everything at our house to be conducive to the way we live. We have several outdoor areas that would make great external living spaces, but we haven’t done a great job of outfitting them for the task.

All this to explain why I decided I needed to make a giant pile of outdoor cushions that I could lay upon like the Princess and the Pea. I wanted them to be cheap, washable, refurbishable, and also work with our inside decor. Fabric and wood don’t do well outside over the Seattle winter, and I can’t store things in out non-existent storage space. So I put together a handful of pillow forms from scrap material, filled with recycled styrofoam peanuts; then covered them with painted canvas covers. In one afternoon I had 7 assorted cushions, and dreams of the perfect summer.

SUPPLIES

Fabric scissors and optional pinking shears
Sewing machine and thread
Pillow Form Fabric: approximately 24″ (2/3 yard) of 45″-wide lightweight scrap fabric per pillow
Pillow Cover: approximately 24″ (2/3 yard) of 52″ to 60″-wide canvas-type material per pillow
Styrofoam Peanuts: about a grocery sack full per pillow. Make sure that you are using styrofoam peanuts instead of the cornstarch ones that melt under water. Imagine the mess!

DECORATING SUPPLIES

Tulip Color Shot Fabric Color: I used Teal, Blue, and Green.
Scissors
Tape: masking, packing, cello, washi. Whatever you want!
Con-Tact Paper: A great option for cutting out larger masks or covering more material.
Decorative punches and scissors
Compass, or fun shapes to trace

Step 1: Making the Pillow Forms

Take your scrap pillow-form material and fold it so that the selvedged edges touch. Cut the other two sides with pinking shears so that you have an approximately 23″ square (45″x23″ unfolded.) Sew a 1/2″ seam along the two pinked edges, then do the same for about half of the remaining side.

Fill the form about halfway full with peanuts, then sew the opening closed to seal your pillow form.

Hire a professional to test the security of your stitching.

Repeat until you have run out of material. (I made 7 pillows so that I could make a GIANT PILE.)

Step 2: Making the Pillow Covers

There is dirt outside, so you want to make sure that your pillow cover can be easily removed and laundered; this also means you want to pre-wash your fabrics so there is no future shrinkage.

Cut your fabric to about 23″ wide. With the back side showing, fold the width of the fabric into a tube about 22″ wide. The overlapped pieces will make the flap for inserting and removing your pillow form.

Stitch up the two open ends of your tube approximately 1/4″ in.

Then turn the cover inside out using the open flaps. Make sure to press the corner all the way out with your finger or a pencil.

Stitch around the outside edges of your pillow cover, about 3/8″ in- then you’re done!

Step 3: Decorating the Cushions to Match your Life.

Decorating the pillows was definitely the biggest fun in this project (other than sitting in the sun on the cushions later.) If you’re a selfless person, you could share that fun with your family and friends, and let each person design a mask for their own pillow. Masking the pillow is as easy as using tape and scissors. Build shapes out of strips of tape, or cut shapes out of contact paper. (ABOVE: I used a compass to draw circles, then cut and arranged them on the front of my cover.) You could have the initials of everyone in your family, silhouettes of your pets and favorite animals… anything really.

Once you’ve settled on a masked design, take it outside and spray it down with your fabric spray paint. (I used Tulip Color Shot Fabric Color which is washable and flexible.) Remember that spray paint doesn’t ever go on consistently, so embrace the irregularity and leave some patches lighter than others.

After you’ve got a nice coat of paint on, let your cover dry for an hour or so before pulling off the mask.

Then let your covers air out for a few more hours.

When everything is dry (not sticky or smelly) you can put your pillow forms into your covers. Slip the form into the open flap, then push it down under the inner over-lapping flap. Press the corners of the form into the corners of the cover and shake and stomp it until everything looks nice.

Then build the tower of pillow on which you will reign.

Or, you know. Share with your friends.

Wheeee! Pillows.

AIM DIY: Paper Maché Birdy Penny Bank

March 3, 2016October 17, 2023 | Alison - Adventures-in-Making

From 2014-2016 I chronicled my crafty endeavors on the site Adventures-in-Making. I’ve selected a few of those DIY’s, Recipes, and other posts to share on the site.

My friend Tara is a paper maché inspiration. A couple of years ago she made a couple of piggy banks that were so amazing I decided I needed to make a bank of my very own. A birdy bank.

I love that papier maché gives you the opportunity to make basically anything out of recycled materials. This is a great project for kids and adults alike- just be ready to take it in shifts over a couple of days so that the form has time to dry between each coat.

Basic Supplies and Tools

A table cloth or paper cover and an apron. This is a wonderfully messy project!
A balloon
Newspaper
Flour and water (to make paste)
A piece of chipboard (like scrap from a cracker box)
This template for the feet, beak, wings and tailfeathers (which you will cut from chipboard.)
Masking Tape
Glue – Hot glue works great, but other thick glues work in a pinch
Scissors and craft knife

Finishing Supplies

Sand paper or sanding block
Acrylic paint
‘ glue or similar
Brush

Step One: Starting the Paper Maché and Form

Blow up one balloon about 5.5″ in diameter, and crumple up a piece of paper to make a head about 2.5″ in diameter. Tape the “head” to the balloon*, roughly the opposite side from the tied end. (If you would prefer the inside of the birdy to be smooth, cover the balloon with a layer of paper maché before attaching the head.)

To make your simple paper maché paste, mix one part flour with one part water. (You can change this ratio if you prefer a more watery or thicker paste. Practice makes perfect.) Stir the paste with your finger until it is smooth.

Tear your newspaper into small strips and pieces and begin to coat your body form with a layer of newspaper. Dip each strip into the paste, and pull it through your fingers to remove excess paste and moisture.

Overlap the pieces of newspaper on your form, and cover all but the tied end. It may be helpful to set the balloon on a cup or bowl to lift it off of your surface.

When you have completely covered the form with one layer of newspaper, set it aside to dry. If you have a fan or space heater, set this little guy in front of that and it will dry faster. Make sure to let it dry almost completely before moving to the next layer of material, or you will have a soppy mess. At least wait a few hours.

Step Two: Adding more Detail

Since your bird looks nothing like a bird yet, it’s time to add some appendages. Download and print this template and cut each of the pieces from a piece of chipboard.

To build the birdy legs, cut into one side of the chipboard as shown, and roll the other end into a cylinder. Secure the roll with a couple of pieces of tape.

Then tape across the foot to attach it to the leg. The flap left at the end of the leg will be glued to the base of your balloon form.

Roll the beak to form a cone shape, and tape it in shape. Stuff a little piece of paper into the open end of the cone to make it easier to attach to your birdy head.

Glue works best to secure the wings, legs, beak, and tail feathers to your form. Hold them in place until the glue is holding firmly. When everything is in place, begin to add another layer of papier maché, covering all the new parts of your bird in addition to adding another layer to the main form you’ve already covered.

As you add paper, make sure to leave the end of the balloon visible; this is where you’ll be breaking the balloon and pulling it out. Paper maché is very forgiving and it’s easy to cover up this hole.

When you’ve covered the form with one or two layers of paper, let it dry again. You may find that you have to stop before you’ve completed covering the whole thing because life gets in the way of your messy fun, or your messy fun become a little too messy. No worries! Just make sure that your paper is as smooth as you can make it, and let the bird rest.

Step Three: Removing the Balloon and Making this Guy a Bank

Yes. It looks silly. That’s okay, the best things are silly. When your form is completely dry, you’re ready to remove your balloon. Gently grip the balloon’s knot, and pierce the balloon to let the air out. As it shrinks, it should pull away from your paper. If it sticks in a spot, gently pull it out of the hole.

No bank is complete without a place to put the money. Mark a line down the back of your bird, between the wings, about 1/4″ wide and 1.5″ long. Use a craft knife to carefully trim out the piece you’ve marked.

To finish the bottom of the bank, you have a couple of options. You can either add an access hole for money to be removed or go with the ol’ piñata method– keep the money inside until it’s time to smash! (Which is definitely satisfying.)

If you’d like to make your bank reusable, find a small lid or something else that would work as a plug. Trace around the shape and cut any extra paper. It you’re having trouble keeping the cover in, trace it onto a scrap of chipboard and make a ring the perfect size, then glue that on top of your form and cover it with paper. The chipboard with provide a little extra stability. (Yes, I know this all looks kinda amusing. Giggles are allowed.)

Step Four: The last of the Papier Maché

If your form is feeling pretty secure, it’s time to start adding the last layer of papier maché. The paint will not completely cover the paper (unless you want it to) so this is a great time to start having fun with your paper color and prints. Save gold and orange colored paper for the beak, cover the wings and head in dark colors, and use white newsprint for the breast. When you’re happy with the way it looks, let it all dry overnight!

Step Five: Sanding and Painting

If you’re anything like me, your form will need a little sanding. USe sand paper or a sanding block to smooth off any edges of paper, clumps of paste, or rough edges- making sure not to sand below your papier mache layers.

To make a transparent paint layer, mix equal parts glue and white acrylic paint with a little water. (Add more glue for more transparency, or more paint to cover the paper more opaquely.)

Gently apply a layer of paint and glue to the whole form and let it dry.

When it dries you will still be able to see a lot of your newspaper pattern. If you like, add another layer of white paint, or start to add more colors to bring out details. To keep some of the transparency, you can water down your colored paints and streak them across your form.

Let it all dry, and get ready to fill it with money!

Using this balloon method you can make pretty much any animal you want! I’d love to see!

AIM DIY: Turn a Tea Towel into the Simplest Apron

February 6, 2016October 28, 2020 | Alison - Adventures-in-Making

From 2014-2016 I chronicled my crafty endeavors on the site Adventures-in-Making. I’ve selected a few of those DIY’s, Recipes, and other posts to share on the site.

My cooking style is much like a cartoon: with ingredients flying everywhere, sauces spilling across every surface, and flour covering every inch of my clothing.

Aprons and abundant cleaning cloths are an absolute necessity. Since I like to cook my aprons need frequent washing, so I set out to make one to spare from a fun tea towel. (Before you ask, this lovely tea towel is from Seattle local Sunday Drive Designs.)

SUPPLIES

One pre-washed and lightly ironed tea towel
About 3 yards of fabric ribbon
Corresponding thread
Straight pins
Scissors
A sewing machine or hand needles

This design breaks down very simply into a tie around your waist, and a loop around the back of your neck.

Start by holding the tea towel up in front of you, and marking with a straight pin where your natural waist is. (For me, it was about 1/3 of the way from the top of the tea towel, at about 9″.) Cut a length of about 2 yards from your ribbon, and pin it across your tea towel at the point you marked.

Cut two more lengths of ribbon, on 12″ long and one 24″ long. One each piece, fold about 1″ underneath, and pin to one of the upper corners of the tea towel.

Now to the sewing! I used a straight stitch on my machine to attach the ribbons to the tea towel (which I show below) but if you don’t have a machine, don’t fret! You can hand stitch these pieces on without too-much trouble, just give yourself a little time.

If you’re using a machine, follow the waist tie with a straight stitch, about 1/4″ from the edges.

Then tack the neck straps on each side. (I stitched an “X” shape across the tab for reinforcement.)

With all the ribbon ties attached, slip on the apron and tie the pieces.(The knot of the neck strap will be on one side, since one strip is longer than the other.) Check the length of all the pieces, and trim the ends off of any of the pieces that are way too long. Make sure not to trim any of the pieces too short! You might want to share the apron with someone who is a different size.

Once the pieces are trimmed, take off the apron to finish the edges of the ribbon.

Fold about 3/4″ of the ribbon under, then fold again to hide the raw edge of the ribbon. Pin it flat, and repeat on all of the raw edges.

Finish by stitching the fold down on each end. Bang! Done.

Super simple (and cute) protection from dangerous food-shrapnel.
No more will people know everything about you by the stains on your clothing. You can hide those stains on an apron instead.

Sneaky.

AIM DIY: Target My Heart Pincushion

February 5, 2016October 28, 2020 | Alison - Adventures-in-Making

From 2014-2016 I chronicled my crafty endeavors on the site Adventures-in-Making. I’ve selected a few of those DIY’s, Recipes, and other posts to share on the site.

About 12 years ago I stitched together a utilitarian pillow stuffed with cloth scraps and called it a pincushion. It was my sad companion through many a sewing project, and as much as I wanted to replace it I never made the time.

Well! The time has come.

Seeing as it’s February and Stitches + Threads time, let’s turn Cupid’s target into a nifty little pincushion.

SUPPLIES:

Red and white craft felt
Corresponding thread or embroidery floss
A small scrap of chipboard
A black permanent marker (I used a Sharpie Stained marker.)
Your favorite adhesive
A pair or scissors
Sewing needle
A strong thin magnet
The printed fabric template: to download click on the image below, or here.

* Optional : If you’d like to turn your pincushion into a wrist band you will need a small length of elastic and a second magnet.

First use the “Wrist Guard” template piece to cut a small heart out of chipboard. This will be place inside the pincushion to keep you from pushing pins all the way through. Use your favorite adhesive to attach one magnet to this piece of chipboard.

Next tape a small piece of white felt to the template sheet and use a window to trace the rings of the target shape with your black marker. You may need to go over it a few times to make the rings as dark as possible.

Set this piece aside for a moment to dry or you will end up with marker all over your hands. (Which is fun!) While you are waiting, use the “Heart” template to cut two red heart pieces, then when the target is dry cut just outside of the first dark ring. Keep all your little fabric scraps for the stuffing steps later. (Waste not, want not and all that.)

Place the target piece in the center of one of the heart pieces and pinch or pin them together. Using black thread or embroidery floss whip the target down to attach it to the pincushion. (I used a blanket appliqué stitch around my target, similar to the one Rachel used in her Alphabet Hoop Art DIY . You can watch a video of how it is done here. If this looks tricky to you, use any old stitch you want!)

When the target is all stitched down make a sandwich with the remaining pieces: target+heart piece, chipboard+magnet piece, plain heart piece.

Then use thread (or floss) to stitch the two red felt heart pieces together, beginning at the top of one side. (For this stitching I used a blanket stitch. You can see a video of a pro doing it here. Any stitch should work to make this little pillow, so play around with it!)

When you reach the top of the other side of the heart, stop sewing and collect your scraps to stuff. Any large scraps can be cut into tinier pieces that will fluff up the inside of you cushion.

Start to fill the space between the chipboard wrist guard and the heart+target piece, using a little bit of stuffing at a time. Make sure to press into the point and sides of your heart to make it really puff.

When you’ve got it almost over-full stitch up the remaining open space and tie a firm knot. Tuck your thread-end into the heart or trim it and you’re all done!

So, why did I have you include a magnet? Because magnets are awesome! If you’re prone to losing straight pins like a startled porcupine loses quills you’ll appreciate the pin collecting magic of a strong magnet. Have a magnetic board or fridge in your making space? Smack your pincushion there for safe keeping!

But if you want to really kick your pincushion up a notch…

you can make a magnetic wrist band. Cut a piece of elastic a little bit smaller than your wrist, and glue a magnet to one end. Sew the two ends together to form a loop, stitching around the magnet.

Then you should be able to attach your pincushion temporarily to your wrist whenever it’s convenient.

If you’re anything like me, it will be convenient a lot.

I don’t think I’ll ever look back to the silly old pincushion of yesterday, but I am tempted to make a bunch more of these guys. Maybe a porcupine…

AIM SHOW+TELL: A Rainbow of Faux Embroidery

February 4, 2016October 28, 2020 | Alison - Adventures-in-Making

From 2014-2016 I chronicled my crafty endeavors on the site Adventures-in-Making. I’ve selected a few of those DIY’s, Recipes, and other posts to share on the site.

I have spent quite bit of time working on my studio lately, and in the process have embraced a few truths about my personality. 1-I like to turn chaos into order 2-I love clean visually simple spaces with little subtle details 3-Rainbows are the best.

With that in mind, I set out to turn this basic curtain (that hides the closet that houses the clutter) into something a tiny bit more special.

To be honest, I had been thinking about making some changes in my studio for a while, and the bifold doors to my closet were in desperate need of sprucing up. I did some research online and apparently you can replace slats of bifold doors relatively easily with fabric these days so I considered removing the old slats and replacing them with some new material.

However, in the end, I decided to simply refresh the curtain that the doors hide behind. I might still replace the slats on my bifold doors at some point in the future, but, for now, I am really happy with how the curtain turned out.

Anyway, I have an absolute wealth of Sharpies, and I decided to use them to doodle a faux-embroidered rainbow trim across the curtains.

First I cut strips the length of the curtains and about 8″ wide to doodle on.

I ironed under the raw edged, and put a seam down the middle as a reference point for the decoration.

I then gleefully sorted my Sharpies by color (to understand my glee, see points 1 and 2 above) and chose the best colors for my rainbow.

I divided the length into a small portion for each color, and made a light mark where each color began and ended.

Overlapping those marks a bit, I began to draw shapes with small dots and dashes– mimicking the stitches on decorative embroidery pieces. I used a lot of botanical shapes (cause I love ’em) and tried to break up the space with a lot of variety.

When I had the strips all filled up with decoration, I pinned them to my curtains, and used a simple zig-zag stitch on my machine to attach them for good.

I really like the little touch of color this added, and it was tons of fun to doodle inch-after-inch of floral rainbow.
One day I’ll show you some of the other rainbows I’ve captured in here…

Cause they’re the best.

AIM TOOLBOX: Tips for Sharpening a Grumpy Paper Punch

December 18, 2015October 28, 2020 | Alison - Adventures-in-Making

From 2014-2016 I chronicled my crafty endeavors on the site Adventures-in-Making. I’ve selected a few of those DIY’s, Recipes, and other posts to share on the site.

I ask a lot of my tools, which is why I forgive my paper punches when they hesitate to punch happily through yet another piece of cardstock.

Instead, I grab a piece of aluminum foil, fold it several times, flatten and…

punch through it again and again until I have a foil mess…

and a cleaner punch.

Tip shared.

Do you have any tips we should know about? Email your little tricks to [email protected] and we might be able to share them with our little community.

AIM DIY: Photo Album Pop-up Ornaments

December 17, 2015October 28, 2020 | Alison - Adventures-in-Making

From 2014-2016 I chronicled my crafty endeavors on the site Adventures-in-Making. I’ve selected a few of those DIY’s, Recipes, and other posts to share on the site.

Okay. I’ll admit it. I have possibly been making too many ornaments.

The floor is covered in little bits of paper, the ribbons are everywhere, and cat is oh so happy. (Happy and thus in the background of many of my photos.) I can’t help it. I’ve given myself over to the ornament bug, and even though I’ve told myself that these are ‘just this year’s ornaments’, I’m not sure I’ll have the self control to throw them all away.

I need a crafter help line… or maybe I can just spread the decoration disease and have you all join me in the madness. (*evil laughter*)

My sister recently handed over a large bag of family photos, and after the proper period of mortification I decided that I needed to do something with them. The best part about being in charge of photo projects is that you can include only adorable pictures of yourself, and edit out the slightly more awkward times.

I pulled together a selection of photos of family that yelled “HAPPY HOLIDAYS, Y’ALL!” Scanned and shrank them, then pulled out a few basic tools to turn the faces I love into ornaments I’ll cherish.

SUPPLIES

Resized photos printed on medium-heavy weight paper
Extra colored paper or cardstock
Medium to large hole punches– any symmetrical shape will work, I used circles and ovals
Ribbon or string
Buttons, bells, or beads
Paper glue or adhesive

To begin I punched my favorite people out of my favorite photos, and the same number of circles out of cardstock. Then I chose between 4 and 6 of my favorites, the same number of solid circles, and folded each in half– top to bottom.

I chose a button than matched my cardstock, then cut about 16 inches of string and fed it through the button.

I used my Scotch ATG gun to apply adhesive to each folded piece (glue works too).

I attached each piece to the one before it in a stack, alternating photos and cardstock. (Make sure that you don’t accidentally glue your sister in upside-down. She wouldn’t like that. All photos should point the same way.)

I laid the string and button across the spine of my stack (button on the bottom), added a little adhesive to one of the folded pieces, and attached the top and bottom piece to form a ball shape.

Then I fed another button on above the ball, tied a knot, and fluffed open all the pages.

I love how simple they look from far away, but each page is a memory of the holidays and of my family.

I did a few variations, using different punches, and combining shapes on one ribbon; but they are all put together the same way which means I could spend more time remembering good times than obsessing over the process.

It also means it’s a great project for kids, who might get a thrill out of punching holes out of photos.

and keeping them forever.

AIM DIY: Playing Card Ornaments

December 10, 2015November 7, 2020 | Alison - Adventures-in-Making

From 2014-2016 I chronicled my crafty endeavors on the site Adventures-in-Making. I’ve selected a few of those DIY’s, Recipes, and other posts to share on the site.

An old deck of cards in one hand, and the perfect Christmas Tree outside… something weird’s gonna happen.

We love games at this house. Card games, board games… you name it. I love to buy my children card games for Christmas or on their birthday as we love being able to play games with each other as a family. There are so many different card games out there that 8 year olds love to play with and so I try and find ones that are suitable for their age. We enjoy playing with them that much that I’m replacing them more regularly than I’d like to be. I don’t love worn-out cards, though, so I’ve been looking for a clever way of getting rid of a couple of our older decks. After playing with strips of paper as Christmas ornaments, I started thinking about ways to turn flat cards into 3-d shapes. Internet searches gave me a few options, including this great tutorial for making ornaments out of MTG playing cards. After following the tutorial, I made a couple of tweaks and ended up with another great collection of ornaments for our outdoor holiday tree.

Supplies

A deck of cards
Thin-ish wire: I used 22 Gauge floral wire
Assorted beads or buttons: Make sure the wire will fit through the holes.
Wire clippers and pliers
Craft knife or paper cutter
Awl or large needle for piercing cards
Ribbon or string

To begin you will cut several playing cards into 1/2″ strips. Choose 16 of those pieces to turn into your first ornament.

Poke a hole, at the bottom and top of each piece, approximately 1/4″ from the end. (You should be able to pierce through multiple cards at once.)

Trim a length of wire, approximately 10″ long, and put a small loop in one end. String at least one bead as a stopper, then start feeding your card pieces on, one at a time. This will be the bottom of your ornament, and the side showing from the bottom (shown above) will be the side of the card facing out on your ornament.

IMG_3527_playingcardornaments — The red side will be hidden on the inside of this ornament.

Once you have all your card pieces fed on the wire, add about 1-1/2″ of beads as spacers.

Starting with the bottom piece of card, gently feed the wire through the pierced hole at the other end.

Do the same with the next lowest piece of card, letting it rest against one side. Repeat with the next lowest piece of card EXCEPT let it rest on the other side of the center.

Repeat this action on each piece, going back and forth between each side of the ornament. It should begin to form a sphere.

There should be just enough space to feed the last (most interior) piece through. If you feel like the pieces are too cramped, you may want to gently tear a piece or two off your wire.

When you have all the pieces wrapped back around, add another bead or two, make a loop in the wire, and trim. Feed a ribbon through the loop, and you have a nifty ornament!

Other things to try

Make the spacer inside the ornament longer for a more spherical ornament, or make it shorter for a more compressed “space saucer” ornament. The different shapes will need a slightly different number of card pieces, but I’ve found that they all use between 14 and 16 pieces.
String two ornaments on the same wire for a more complex shape.
Mix and match back pieces and front pieces for a striped pattern.
String an extra piece of beaded wire or string to the bottom of the ornament for even more decoration.
Go crazy with bead spacers and see what happens.

What do you think? Trash to treasure?

AIM DIY: Scrap Paper Strip Ornaments

December 3, 2015October 28, 2020 | Alison - Adventures-in-Making

From 2014-2016 I chronicled my crafty endeavors on the site Adventures-in-Making. I’ve selected a few of those DIY’s, Recipes, and other posts to share on the site.

***

Up until the last couple of years, Safety Husband and I would go home to Texas for the holidays, and we never felt the need to decorate for the season. For the last couple of years we’ve talked about decorating the “Christmas Tree” that just happens to be growing in our upper yard, and this year we’re making it happen. I’ve been putting my brain power into making ornaments that are either weatherproof, or are meant to be thrown away in January. It’s been a great chance to work through some of the materials I’ve been… ahem… collecting.

I love vintage ornaments and paper, and after a couple of years of experimentation I was ready to combine those two loves in this one ornament design. Super quick, because they are held together by staples, a couple of basic techniques can build a whole tree’s worth of decoration.

Supplies

Stapler
Ribbon (3/8″ to 1/2″ wide is great)
Scrap Paper: I used leftover 12×12 scrapbooking paper, but catalog or magazine pages would work well too! If you’re using thin paper, you might want to double up on the number of strips per ornament.
Clips: binder clips work great for this, but a clothespin will work in a pinch. (Pun intended.)
Scissors

To begin, cut about eight 1/2″ strips off your paper. (You can vary the number, just make sure you have an even number of strips.)

Cut a length of ribbon about twice the length of your paper strips.

Fold the ribbon in half, and stack half the strips on each side. Staple near the bottom of the stack, away from the loop of ribbon.

The staple will go through all the paper and the ribbon, securing that point. (Staples must be cheating, because they make this too easy.)

Put a clip about halfway down the paper, clamping the whole stack of paper and ribbon. With one hand, hold the clip, and with the other gently pull on the loop of the ribbon.

This should cause the paper to pooch out a little on the other side of the clip. Repeat the holding and pulling step, but this time grab the ribbon loop and the two strips of paper closest to it on either side.

Repeat again and again, adding another strip on either side, until you reach the outer strip.

Then carefully put a staple through the area the clip was holding.

Trim any excess paper with a pair of scissors.

If you want, you can curl some of the extra paper to add a little decorative detail. Simply roll the paper around a small pencil or paintbrush to curl it.

Once you get the hang of the whole pull method, you can shake things up by doing a similar technique, upside-down.

Staple in the middle of your ornament, and turn each strip back down. Once you’ve turned each strip, staple them at the bottom to form a heart shape.

Using these two techniques you can make a whole range of funky vintage ornaments.

If you get sick of looking at the staples, you can replace them with a couple of stitches. Simply poke a hole in the middle of the stack, and make stitches back and forth to secure the ornament.

Remove the staple, and you’ll never know it was there.

Or spend that time making a whole army or ornaments. It’s up to you!

One set down, more to go.

AIM DIY: Simple Trees for Your Chipboard Forest

December 2, 2015October 28, 2020 | Alison - Adventures-in-Making

From 2014-2016 I chronicled my crafty endeavors on the site Adventures-in-Making. I’ve selected a few of those DIY’s, Recipes, and other posts to share on the site.

Even before I was done building little chipboard houses I knew they would need a little setting to live in. I wanted to come up with a simple and flexible tree template that I could make a whole forest out of. Inspired by my old paper bird project, I used strips of chipboard to build these trees.

Supplies

Scrap chipboard: from the backs of notepads or boxes. My pieces were 8.5×11″
You favorite paper glue
Clothespins or clips
Craft knife
Scoring Tool: a bone folder or dull knife work great

I began by making two score lines along the long side of the board, at .5″ and at 2.5″.

Then I cut two pieces, 1″ wide, off the other side for the trunk of my tree. The remaining piece of chipboard had my score marks on it, and I trimmed it into 1″ pieces (each piece has the same score marks).

I applied glue to the trunk pieces, and clipped them together to dry.

While the trunk glue was drying, I folded each of my small pieces along the score marks, forming an L.

Piece by piece, I applied glue to the .5″ flap and the top of the L…

then clipped them to the trunk. In this picture you can see that I folded the two pieces of the trunk away from each other at the base; this will allow the trees to sit by themselves.

I continued to add tree pieces until I liked what I saw (typically between 2 and 4 tiers), holding each piece with a couple of clips.

When I was happy, let the glue sit overnight, held by the clips. (Happy little trees, as the man said.)

On some I trimmed the top a bit, some I left tall. I love the way the variety turned out. These would be great with snowy glitter added, or paint. I’m just happy to have a forest for my little chipboard houses.

Trees for the little paper world.

Yes, I know I sound crazy. Now go make something!

(;

So, There.

So There Letterpress and Stationery Studio in Issaquah

AIM DIY: Patio Friendly Pile-Up Cushions filled with Styrofoam Peanuts

SUPPLIES

DECORATING SUPPLIES

Step 1: Making the Pillow Forms

Step 2: Making the Pillow Covers

Step 3: Decorating the Cushions to Match your Life.

AIM DIY: Paper Maché Birdy Penny Bank

Basic Supplies and Tools

Finishing Supplies

Step One: Starting the Paper Maché and Form

Step Two: Adding more Detail

Step Three: Removing the Balloon and Making this Guy a Bank

Step Four: The last of the Papier Maché

Step Five: Sanding and Painting

AIM DIY: Turn a Tea Towel into the Simplest Apron

SUPPLIES

AIM DIY: Target My Heart Pincushion

SUPPLIES:

AIM SHOW+TELL: A Rainbow of Faux Embroidery

AIM TOOLBOX: Tips for Sharpening a Grumpy Paper Punch

AIM DIY: Photo Album Pop-up Ornaments

SUPPLIES

AIM DIY: Playing Card Ornaments

Supplies

Other things to try

AIM DIY: Scrap Paper Strip Ornaments

Supplies

AIM DIY: Simple Trees for Your Chipboard Forest

Supplies